Elite Screens 100" Wall Mount Fixed Frame Projector Screen Diagonal 16:9, 8K/4K Ultra Hd Ready, Aluminum Frame, Projection Screen for Indoor Home Movie Theater Cinema, SF100HW2, CineWhite 1.3 Gain

I've had this screen since September 2017, and so I've been using it every day for over a year now. It took me about an hour or so to assemble and hang (it 's easier if someone can help you assemble it) and I replaced an old pull down screen with this one. The edges are a nice black velvet, and do a good job of absorbing light if you overscan the projector image. The reflectivity of the screen is very good for a screen at this price point, and worked well for my 1080p projector. I recently upgraded to a 4K Epson projector and the sharpness and quality is unbelievable for a 100" image. You can buy a more expensive screen from Da-Lite or Draper, but for home use, this one does well for moderate brightness projectors (1200-4000 lumens) and I've actually been using Eco mode on my projector since the brightness was causing eye fatigue just watching a football game or a movie. I have my screen hanging from the ceiling, but you can also mount it to a wall. It's not too heavy, one person can easily lift it, but it's a lot easier to position with a second person. I am very impressed by this screen and would definitely recommend it to anyone looking for a reasonably priced home theater screen that isn't just a piece of garbage. One huge advantage of a permanent screen over a pull down or motorized kind is there are no wrinkles at all, and the screen will never move around if there are fans blowing or people walking around, something that would happen with my old pull down screen, also made by Elite.

I originally used a cheap screen that I purchased for my cheap LED projector. What a difference it made between that screen and this screen. It's like night and day. Definitely well worth it. But gotta admit put it together was not a walk in the park. Assembling the frames together was easy, the hardest part was the screen. At first I thought my screen was too small, I didn't know that it would stretch out that far, I was afraid that I was gonna rip it. I guess that why I see no wrinkle at all. I wish it came with more extra spring though. Two of mine were totally stretched up to the point where I can't use them anymore. Will have to go to hardware store to look for some. Middle bar support was not easy to assemble either. But I got it in somehow. It took me 2 to 3 hours to finish the whole thing, but It was well worth it after I see the picture on the screen. The 135" picture on this screen looks as good as my 65" QLED in my living room. Highly recommended.

Purchased the 135 inch Star Frame Elite Screen from Amazon. Product was packaged very well, and arrived in perfect condition. Assembly was straight forward and not too difficult, would advise you make sure you have the correct instructions included...check for the center support and that what is in instructions matches what was shipped. If you install all of the tension springs you will not be able to install the center support, and removing the springs is harder than putting them on. Wish the holes on the mounting brackets were a little closer together, they are spaced too far apart to hit one 2x4 stud, so you are going to have one in stud and one in just drywall. To be fair, the intent is to be in drywall, I just prefer to use studs for a stronger mount. A longer bracket with two holes 1 inch apart, and two more 3 inches apart would be a great improvement. Screen compliments the Optoma 50UHD perfectly and extremely pleased with video quality. Screen is made of high quality material, both frame and screen, and should provide years of service. Would highly recommend to others reviewing screens to go with Elite. As mentioned above, I did receive the wrong instructions for my screen, but a call to Elite Customer Service was all it took to correct and the follow through was very thorough and prompt, which is a key to understanding how good a company really is.

This is my first time assembling a projector screen, but far from my first time using tools. I honestly was impressed with this screen for the price. I had some issues with parts missing, but luckily they provide extras. For the price, and the issues I experienced the screen is still worth it. I wasn't expecting perfection in every detail. This is a budget friendly screen. If it was one of those $500-$1500 screens I would expect perfection for those prices. Screen was very well packaged and arrived without damage to the screen, even though the box looked pretty beat up. The directions were pretty straight forward and easy to follow although it would have been easier with larger pictures but still do-able. I really liked that they provided a thin sheet like material to build the screen on. The corner and center sections that connect the frame together, have threaded holes for the screws. I had a few screw holes that the screw had a hard time getting started in, probably small burrs left over from creating the threads. I just removed the connector section and was able to put more force into the screw when holding the connector section by hand, and it cleaned up quickly and the screws was able to go into the threads easily after that. Extra screws are provided. I think I have something like 4-6 extras after completion. The screen material itself fit great onto the frame. The dowels provided fit great into the sleeves along the edges of the screen. I did not have any dowels sticking out past the frame((If dowels are too long, they would be easily cut with a cheap hacksaw)). I would suggest laying out the dowel rods on the back of the screen in the frame before sliding them in the sleeves. That way you will be able to see where the dowels fit bet. For my 100'' screen, I had 6 dowels, 2 longer dowels, and 4 shorter dowels. The 4 dowels went in the sleeves on the top and bottom of the screen, and the 2 longer ones went in the sleeves on the sides of the screen. Instructions for connecting springs to the dowels through the holes in the sleeves was very easy follow, and worked out great for me, other than I didn't have enough springs pre-installed. ((they place the springs into a track on each section of the frame from the factory, the springs are taped down into the track so they are secured during shipping)) I found it was easiest to pull the dowel in the sleeve as close to the spring as possible and then slightly lift the screen up when inserting the spring hook through the hole in the sleeve onto the dowel. It kept the spring hook from making holes or scratching the sleeve that the dowel was in. Center bar was last to install and was easy, no hardware for it. It just uses a friction fit. This screen also comes with some brackets and hardware to hang the screen on your wall. The hanging brackets are made out of aluminum and use a French Cleat style(best hanging style) hanging system, which the frame perfectly rests on the brackets without interfering with any of the springs. Once assembly was completed the screen frame feels light yet strong. I had no wrinkles at all when finished. I never had any smells from manufacturing. The screen looks very high quality, especially considering I purchased it for $150. **The only reason I am giving it 4 stars is because they didn't install enough springs on the frame rails from the factory. Luckily they sent 4 extras which I used all 4 to make up for the ones missing. The frustrating part is that I had to take more than half of the screen apart to add in the missing springs where I needed them.

The screen is great! I already have a portable Elite Screen so I was familiar with the quality. I will say that you need to be very careful with the black skin around the edge while assembling or you will end up like me and have scuffs in it. Not a big deal, but you want it to be perfect. Also, it is not easy to assemble. The springs are a massive headache, but they are what keep the screen itself taut, so they are a necessary evil. BTW, don't do like I did and stand it up against a door handle. I was terrified when I went back to it and saw the bump in the screen, but it immediately disappeared. For what it's worth, this was shipped to me on Guam and it was packed well enough to survive being on the ship for weeks. Would definitely buy again.

Really nice quality screen easy set up

Everything came packaged well but there were no instructions and missing 1 retaining rod. Framing is really nice looking

I had a retractable projection screen before this and let me tell you: get this. The screen on the retractable always had creases, was never straight, and didn't seem to have the same quality. This one was super easy to put together (took me about 30 minutes to build and hang by myself) and is leaps and bounds better than my last one. The black felt around the edges is nice and the screen is a fantastic quality. I am noticing a huge difference in colors and black levels. 10/10, highly recommend.

Good pic Awsome realy before i use also elite screen manul B100 inch but know super pic deliverd . But One thing screen joined must lil havey

Once put together this is a nice screen. It definitely takes some work and tine to build it. But once done it looks good. I would recommend it.

Got this super quickly for our small basement cinema room. The screen is super sturdy and came with everything needed to mount it on the wall. The quality is quite good for the price. Definitely install it with 2 people and start installing the tension springs from the corners first and work your way inwards. There are a couple of YouTube videos that helped with installation too and had good tricks. Definitely worth it!

Disclaimer: This is my first projector screen. I've never reviewed or owned any other types/brands. When compared to other recommended brands, Elite Screens comes out MUCH cheaper. The packaging was impeccable. Assembling the screen was not easy. I did it all solo, and my fingers hurt for a few hours. But don't take that as negative feedback: There's simply no other good solution to stretch the screen. In fact, I believe they should come with more springs than are included. The tension bars run the entire length of the screen, so there's no reason not to add more springs. As it stands, the spaces between each spring almost always create a slight curve in the screen which allows the black border of the (white) screen to show. Not a big deal, very hard to notice during viewing and I'd say no impact on image quality. But those springs must cost very little. Why not add more? I might contact the manufacturer to get more sent my way. Installing the screen on the wall was very easy. Once you've got the brackets on the wall hanging it on them is simple and easy. Overall I am very happy.

Easy to put together, but you definitely need two people. Great instructions and solid product. This is my second screen and am very happy with the quality.