PBT-GF30 4413EA1002B Washer Rotor Hub Assembly (O-E-M) for LG Kenmore Washing Machine Replace MBF618448, 4413ER1001C,4413ER1003B, 4413ER1002F by TOMOON

This part fit well, although as I noted it needs two machine washers as spacers behind the rotor body. Took me a bit to figure that out.The metal splines are better than the OEM original plastice version.My other tip is to save yourself some time and replace the Hall Effect Load Sensor when you do this job. In my case, both needed replacement and it was frustrating to get the rotor hub replaced and find out that the sensor also need to be replaced.It's another ten minutes work to remove the stator and replace the load sensor.Once that was all done, the washer worked like a new machine. Much faster spin during the rinse and drain cycle. That translates to more water being removed from the clothes. That in its turn means that the dryer will dry more efficiently, which will save electricity or gas depending on what type of dryer you have.Highly recommend this part.

It's an easy and cost effective fix, do it yourself, plenty of YouTube videos out there. This is even better quality than OEM.

Like others have mentioned this hub is a little thinner than the original. However these machine bushings that I picked up at Lowe's fit perfectly and were simple to install. My machine is working again.

I read all the good tips from others who have done this repair and I still had trouble because I am a visual kind of guy. I have a LG Front Load Washing Machine Model: WM2501HVA I was trying to repair. I ordered this part and sure enough it was not tall enough and caused the rotor assembly to hit the nuts on the stater. So, I headed to Lowes and purchased a couple of Zinc Machine Bushings 7/8 x 1-3/8 x 14GA. Put two of those on and it sorta kinda fit but not really. The shaft that comes out of the bearing is tapered where it comes out and it left a small space between the bearing face and two bushings, I put on so back to Lowes to purchase a larger bushing to fill that space. The Bushing size I needed is 1 x 1-1/2 x 14GA. In the end it was another trip to Lowes and this is order I put the bushing on. First is the largest one against the face of the bearing – 1 x 1-1/2 x 14GA then 7/8 x 1-3/8 x 14GA then 7/8 x 1-3/8 x 18GA. ( Note I had to buy an 18GA). So, I put all three on the shaft put on the rotor assembly and it fit perfect. I had to order a new Hall Sensor because the LE error code kept coming on and stopping the washer. Buy a new Hall Sensor and save some time. NOW! the washing machine works, and I don’t have to worry about buying a new one for a while. I did not have a photo of the 18GA bushing but don’t worry they are right next to the others at Lowes.

This product does NOT fit LG washer part 4413ER1003B. The splines do not match up.

I actually only needed to replace the position sensor. But this has to be removed to replace the sensor, might as well install a new one.Especially after using the home warranty to send some idiot to come out for 75 bucks and tell me I needed a new washer. I then fix it for pocket change.Felt and fit just like the original if not better. High quality. Not a cheap flimsy copy.

I bought this as a replacement after the original plastic splined part stripped out. It fits into the drum (with the magnets) perfectly BUT when I put the assembly back onto the shaft and tightened the bolt, the drum had about an 1/8th of an inch play back and forth. This caused the drum to go back and forth during the spin cycle and ever so slightly hit the bolts that secure the copper coils causing an awful clanking sound.I had to make a spacer out of a big lock washer and put it on before placing the drum on the shaft. You CAN"T just throw a big washer on as a spacer because a washer would rub during spin. There's only about 3/16 of an inch that spins as the wash tub spins. Just throwing a washer on would have metal on metal when spinning and damage would surely occur.

Super easy to install and I fix my problem immediately. Loves saving money. Easy to access the back of your washer and easy to install this. There are videos on how to do it and there are easy instructions. Highly recommend