Lisle 39960 Ford Transmission Oil Cooler Line Disconnect Set

Used the 1/2" and it worked great. Slid on one line fine. Pushed it in. Followed advice online to push the line in and then work it out. At first it didn't seem like it was working but constant tug and slight wiggling and the line slowly made it's way out. The second line seemed initially more difficult because the tool wouldn't fit by a miniscule fraction. I tugged on the line enough to get the tool to fit and it then came off as well as the first.

Fonctionne très bien pour tuyau de refroidissement de la transmission ford escape 2010.

Llegó en tiempo y forma y justo en el momento que los voy a ocupar para realizar un trabajo

Till now it doesn't work with any car

I got this for a 2008 Ford F-350 transmissions filter lines. To change the filter. It worked in the end. For first timers: you attach it around your pipe and firmly push the narrow part into the pipe fitting. It forces a circular split ring off the pipe and into a recess within the fitting. The pipe will pull out with your other hand. Keep firm pressure against the tool to hold that split ring still in the fitting as the pipe slides out. There’s a raised bump on the the pipe inside the fitting, which is held in by the split ring. You must get that ring off the pipe and into the recess. Do not twist hard. It will break. Firm and direct inwards. Use WD40 first and during to blast all the grit out. That split ring needs room to move into its recess in the fitting. It’s full of grit.