Performance SPE-9849 4" Single Air Intake Plenum

I had my engine hydrolock twice with an open element air cleaner.Water dripped between the back of my hood and the firewall, even with weather strip in place.I saw this and thought why not.Perfect fit on my Brawler carb.4 inch no name air cleaner fits perfectly.I may run ducting later and move the cone to the front, but for now I'm good.

Finish is so so a yr or so later. Otherwise, fit my TBI perfectly on my camaro.

Does exactly as it’s designed to do.

Not many options available but this one looks good and fits well. I needed a 4 inch for the air volume.

Works great! Made vary heavy duty. I had hit 25 psi an it's fine. Fromthedirt66 on tiktok

After attempting to make a plenum from stainless, I️ ran out of time and decided to try this for a coldness air setup on my jeep wagoneer with amc360 v8. Wanted to use a napa 6637 or equivalent filter (it’s a massive filter the diesel guys use on the ford 7.3l and Cummins 5.9 to build cold air intakes using a replaceable dry filter). I️ live in the high desert of Southern California and wanted to use a dry filter element but wanted plenty of surface area. This sits perfectly ontop of my edelbrock 1403 carburetor and my BAF (big a*# filter) clamps right onto it. Simple, effective setup. And this plenum is of very high quality for the price. I️ have no regrets.

I had a makeshift cold air intake but it was only 3”. I wanted a 4” and have looked at this for over 2 years. Well I finally did it and I love it!They sell the carb hat, tube and an inline air cleaner. It wasn’t cheep but I now have a 4” ram scoop cold air intake and I am super happy I finally did it.The carb hat is nice. I still think it’s far too expensive but there are no other options.Fits a 4 barrel perfectly.Tube runs below my front bumper to pick up air as I drive.

Cast aluminum construction, so you will need a Dremel to cut the pieces of casting flash off of the ID of the Carb hat.Pretty good looking to compliment the rest of the chrome ducting I had fabbed up previously.Still a bit on the expensive side, considering the slop, the hat would slide around even on top of a carburetor mounting flange of 5 1/8.When bolted down, looks good and no shimmy.

This looks like a great air intake plenum.... The correct size for a standard carburetor type air filter location install,Came wrapped up in a non scratch bag in a nice box ....It's correctly machined and has a great shine on it also.... I'm a happy customer

Item is as described. It's a brilliant item unfortunately didn't fit my purpose. My fault. I didn't measure properly. I would definitely do business with Amazon again. Fast sending and items are as described.

La pieza es de aluminio sólido, muy buen acabado, pulido y venía bien empacada. Una vez ya instalada se ve magnífica y sienta perfecto en la base del carburador, en este caso uso un Holley 4412 de 500cfm. Aunque es muy probable que se requiera algún tubo/acoples adicionales para alejar más el filtro de aire. En mi caso tuve que hacer esto último porque el cofre no cerraba bien porque pegaba en el diámetro del filtro, sin embargo ya con la extensión quedó perfecto. Es una pieza bastante recomendable para los vehículos carburado ya que originalmente con el filtro redondo absorben aire "caliente" de los manifolds y en cambio usando esto permite una captación de aire más fresco. Definitivamente sí la recomiendo. Saludos

funciona perfecto , le puse una manguera de 4" y ya puede instalar un filtro de alto flujo en otra parte del coche, no tuve problemas con la altura en un malibu 81, apesar de tener un plato adaptador para un carburador street demon.

The screw on top is not included