Amazon Basics 1/2 Inch Drive Click Torque Wrench, 20-150 ft.-lb, 27.1-203.5 Nm

Good quality, great price and worked at treat when replacing two wheel hubs on my car where greater force was required

I though that it is great value for the price. Arrived in a presentation type plastic storage box and was well wrapped and protected inside. It feels quite heavy and of good quality/solid build. Other users said that it is difficult to set the correct torque settings, but it comes with some pretty idiot proof instructions and being an idiot myself, I found it realy simple to use. Others also said that the 'click' when you reach the desired setting was quiet/got harder to hear the more you used it. Mine, so far, has stayed at the same sound level. Its not the noisiest 'click' but its still audiable. Unlike other reviews, I also found that the torque wrench I ordered does ratchet in both directions. Maybe its due to it being a newer/updated version. Highly reccomended for the home mechanic/DIY'er/ tinkerer at the weekends.

Seems great for the price, bigger than I was expecting. Couple of downsides I've found, firstly it has torque values for lb/ft and N/m, with the rotations adding 1 - 25, but obviously, a 25 point change in one of these is not the same as a 25 point change in the other, as such the N/m side is just seemingly arbitrary markers that corespond to the imperial units on the other side, making setting to in-between values a guessing game. Not ideal if working on something built in Europe using metric values. The other issue I found is the box, I was always told to reset a torque wrench to 0 when finished to stop it adding unnecessary wear to the inside and offsetting the calibration. You can do that with this tool, but when you do, it's extended too far to fit in the case it comes with. As such it always needs to have some force on it when in the box. I don't know how much, if any impact that will have on the tool over time, just seems like an oversight to me. All in all, seems good value for money, but not a perfect tool, hence the 4 stars.

I bought this tool because i have started working on my new and old motorbikes. Initially i bought it only for taking out the wheel nuts so i can change the tyres. It does the job! Also, without this tool i wouldn't be able to take off the front sprocket of older motorbikes, which was factory sealed and not changed in 20 years! Set the maximum torque on this wrench, and pushed it with the full force and took the sprocket out! Pros: Easy to set the torque with the included lock/unclock pin at the bottom, very heavy and very sturdy, has a nice case to store it while not using it. Also, has ft-lb on the other side, so you can set NM and FT. Cons: The tips is not locking (no lock), but it can be good if you want to tap with the hammer. If you setting NM it can be sometimes tricky to see the exact number, so you endup by roughly setting the torque. For the price this is a very good purchase!

Bought this to tighten up some rocker cover bolts on my Mini's engine cover. Perfect for selecting 88 inch-pounds (about 7 foot-pounds or 10 Newton metres). As that is quite a low torque setting, it was fairly essential to know all the bolts were tightened to the same value. I should also say this is still a substantial wrench (despite its quarter inch drive), and it feels well put together. The click is nice and loud as well, so no guess work involved in getting to the correct torque. Easy 5 star.

This only indicates torque when tightening on conventional threads. If you are working on anything with reverse threads ( such as a bicycle), it's worse than useless as you'll over-torque the part while listening carefully for a click that never comes. Other than that, the adjustment felt a bit gritty, like the threads inside weren't cleaned after they were cut. The markings for Nm don't tie up with the markings on the rotating part (because they are ft.lbs only) It's just not a nice tool to use, but good value for money if you only want to tighten conventional threads to values in ft.lbs

Its solid construction ensures durability, while the click feature provides an audible and tactile signal when the desired torque is reached. Easy to use, this wrench offers reliable performance for both professionals and DIY enthusiasts. A great addition to any toolkit!

Got this for my car and needed it to check and do up wheel nuts (and other things). Very good range going from 25 ftlb to 250 ftlb. Came in a nice plastic box with a reasonable set of instructions. This tool is fine for the amature mechanic and is well priced. The selection of the desired torque setting is done by twisting the end untill the twisting handle lines up with the appropriate mark. When storing it shouuld be returned to the lowest setting so as not to strain the spring. Good piece of kit that I hope to use soon. Note: it doesn't come with any sockets, you will need to supply these separately.

Very good quality

La chiave dinamometrica Amazon Basics da 1/4 pollici è un'ottima scelta per chi cerca una chiave dinamometrica economica ma affidabile. La chiave ha una gamma di coppia di serraggio da 35 a 200 in.-lb, che la rende adatta per una varietà di applicazioni, tra cui il montaggio e lo smontaggio di pneumatici, il montaggio di componenti meccanici e la manutenzione di biciclette. La chiave è realizzata in acciaio al carbonio e ha una testa a bussola da 1/4 pollici. La testa è dotata di un indicatore di coppia che consente di leggere facilmente la coppia di serraggio raggiunta. La chiave è inoltre dotata di una scala graduata che consente di impostare la coppia di serraggio desiderata. La chiave è facile da usare. Per impostare la coppia di serraggio desiderata, è sufficiente ruotare la scala graduata fino a raggiungere il valore desiderato. Quindi, è sufficiente applicare la coppia di serraggio alla chiave. Quando la chiave raggiunge la coppia di serraggio impostata, scatta e si arresta. La chiave è precisa e affidabile. Le misurazioni della coppia di serraggio sono precise entro +/- 4%. La chiave è inoltre robusta e durevole. È costruita per resistere all'uso quotidiano. Pro Ottimo rapporto qualità-prezzo Precisione Robustezza Facile da usare Contro La scala graduata è un po' difficile da leggere Verdetto La chiave dinamometrica Amazon Basics da 1/4 pollici è un'ottima scelta per chi cerca una chiave dinamometrica economica ma affidabile. La chiave è precisa, robusta e facile da usare

La qualité perçue ne semble pas optimale mais, pour un usage occasionnel, cette clé devrait faire le job...à voir sur la durée...

Secondary scale is only for ft-lb! In order to know the exact Nm value you need to look it up in the manual! For example when you want 140Nm, you need to set the primary scale to 135.6Nm and turn the secondary scale to a bit over 3. 3ft-lb is around 4Nm so then it adds up (135.6Nm + ~4Nm = 140Nm). It would be better if the secondary scale also would have Nm marking.

ممتاز