SI FANG 5PC 60mm Diamond Cutting Discs 2.4 inch Cut Off Wheel for Dremel | 5PC Blades + 5PC 1/8'' Mandrel, for Drill Attachment Rotary Cutter Polishing Cut Tile Stone Marble Plastic Jade, 0.6mm Kerf

Used them on a die grinder to cut marble and quartz for shower installs. Work well, last longer when lubricated. Treat them as cheap/exposable and you'll be happy. Dont expect them to last forever, but for the price one can be quick to toss them once they slow down.

Worked great on porcelain shower wall. I used two wheels to cut about 36 inches. I’m glad I got these larger diameter wheels to have more clearance with the Dremel.

It's a decent product,They worked pretty good cutting my rocks and crystals

I was looking for a quick, inexpensive solution to cut a handful (6 or 7) of ceramic tiles for a backsplash. This worked perfectly! I attached the bit directly to my high-speed hand drill, clamped each tile to a scrap piece of wood and simply cut along the lines I marked. A couple pieces required several cuts to shape around my outlet. I cut all of my pieces using just one wheel, but did notice some dulling by the end. Not a great solution for big projects, but if you have 20 or less tiles this is perfect.

Great prodect and a great seler thank you so much.

The disks themselves are fine but they don't work well with my dremel tool. They are so large in diameter that my dremel does not have the power to keep them spinning when attempting to cut. I spent 15 minutes attempting to cut through 4 inches of 1/8" thick aluminum before I gave up and put in one of my old reinforced dremel cut off wheels. Two minutes later I was done.

These cutting disks have limits but work well. I use them to cut rubies. That's no easy job. They are very thin so care in planning is a good idea. (they don't waste material) The spindle supplied fits a Dremel standard chuck well but the disk lockdown area is very narrow and the disk must be aligned if using the stock spindle. I made a spindle with a wide head to support the disk. The diamonds are very well mounted to the disk, are very sharp and cut standard boul's similar to cutting hardened steel with a ceramic wheel. I would fasten down anything needing cutting, to the point of making a cutting jig.

Good size cutting wheels and they cut reasonably fast and leave a clean line in porcelain. The issue I have it the metal they are stamped out of is remarkably flimsy making cutting a straight line a real challenge. If it was not for that I would be giving them a better rating

Deben mejorar.