BaomainDH-670 DC 0-30A Analog Amp Panel Meter Current Ammeter + Shunt 1pcs

Meter appears well-made and works as it should. it measures the difference in voltage across the shunt which allows it to measure the DC current.

Early cars had an on-off cutout that kicked in when the generator made more than six volts. It was up to the owner or mechanic to set the charging rate several times during the year.. Too high and you boil the battery; too low and you’re stranded in the winter.My generator has a sliding third brush to set the maximum charging rate. Thankfully voltage regulators are available now that look like the original cutout. To avoid frying the electronics inside them, the manufacturer tells you how to set the generator brush. One way to do this is to have an assistant watch the ammeter on the dash and yell your progress to you. My way to hook an ammeter on the generator post and read the amperage on this more accurate meter.I am pleased with my purchase and offer this photo which is in accordance with schematics others have provided.

I used it to check amps on a trailer, as I couldn't tell what light was blowing a fuse! I made a little holder for the meter! Works like a charm.

Used to replace a twist of 10 gage wire and a voltmeter. Much neater. Mounting the meter requires making your own templet and buying the correct hole saw. I now have a small assortment of hole saws. Ouch!

The shunt bar is to be hooked up in series with the load, that is to say the shunt bar is to be inline with the power source as if it were a inline fuse. All of the current in the circuit flows right through the shunt bar NOT the meter. The two connections on the meter are then connected to the shunt's two terminal screws. if the needle pegs in the 0 direction, the two wires are backwards.

Using two of these on a solar panel to measure input amps and load amps

These items are not full amp or volts. They are mini amps.

I have a small solar set up with two 100 watt panels. As a retired electronic technician I simply had to know what current my panels were giving me and at the same time what current was going out from my storage batteries. These analog panel meters proved to be very accurate at a reasonable price. So yes I give it 5 stars.