Toolwiz Inner Tie Rod Removal Tool 3/8" Universal Low Profile 30-42mm

This definitely requires getting it into place and tightening the nuts every time you need to turn the tie rod, but this works like a charm without any quality issues.My tie rods were really tight and a normal tube-style extractor would not work. I required this and an extra extra long set of wrenches to get it off. It must have required at least 200 lb ft of force to get it off and it worked!After all was set and done, I did not see any visible marks that the metal was warping or any issues with the materials at all. I also did not have any issues getting this tool into place, although I did have to loosen it about twice every 20 degrees or so until i could loosen it by hand.Overall good little tool that I hopefully do not have to use for at least another 200K miles.

Cheaper than renting a tool that is used and abused. This is guaranteed to work on your inner tie rod. Easily adjustable and you’re not hunting for the right size tie rod clamp just for it to slip off. This was a life saver! Just make sure you have the appropriate sized breaker bar.Used on a 1990 Lincoln mark 7 LSC

This tool is great, and has helped me with multiple vehicles. Had it for over half a year now and it works just fine.

Bought this to remove the inner tie rods on a 1991 Toyota Corolla AE91. For the price even a single use is worth the money. It fit around the inner tie rod well and as other reviewers mentioned it is not necessary to tighten it too much just snugly enough. The nuts seem cheap but if you don’t over tighten them they will work and last longer. Installing it was simple just ensure it is done in a way that allows it to turn sufficiently in the direction needed. It looks good. I used it to remove and tighten both inner tie rods. It’s not a tool I anticipate I’ll use often but it did its job this time so I got my moneys worth. The material looks good and strong enough and the gripping area still looks good after use. Like most said the nuts look soft so be careful with that. Let’s see if how many more uses I get out of it.

This is the right piece for removing tie rod. Easy and simple. Stay away from long pipe stuff.

I bought this for an inner tie rod job where space was tight, and it made the job a lot easier than trying to use a regular wrench.The low-profile design helped me get into an area where there wasn’t much room to work, and the teeth grabbed the tie rod well enough to break it loose without constantly slipping. I also like that it covers a decent size range, so it’s more useful than a one-size tool.The main thing to watch is making sure it’s seated squarely before you put a lot of force on it. If it starts at an angle, it can want to walk off the part.Overall, it’s a handy tool for DIY front-end work and saved me a lot of frustration on the job. For something I may not use every week, it was still worth having in the toolbox.

Simple design, works well.May have interference with frame, but repositioning solves issue.Well worth the small cost compared to other tools

Worked like it is supposed to. Quality is not super great, but it did its job. So I can’t complain.

軽自動車で使用。レビューでダメみたいな事を見ましたが、硬くしまっていたラックエンドが滑らず外れました。ちょっと噛み込ませるポイントを見つけるとズレないです。使用後の山もしっかり残っており何度も使えそうです。(機会は少ないが)

Used this to remove an inner tie rod on a 2006 r50 mini. Couldn’t get the track rod off I think was the original one. Didn’t even know about this tool until I had the issue. Was sceptical because some people have had bad experiences with the tool not working.Fitted the tool over the nut and checked before trying to undo the nut.Undid the nut with no issues so for the price it’s earned its cost. Even if I don’t use it again it was worth it. So 5 stars

Goede spul

I used this inner tie rod removal tool on my 2014 Honda CR-V EX-L AWD, and it worked really well. It made removing the inner tie rod much easier and saved me a lot of time and effort. Very useful tool for DIY repairs, especially when working in a tight space. Definitely worth having.

締め付け出来るのでズレ無い。