Orbit 57861 Replacement DC Latching Solenoid for Orbit Battery-Powered Controllers

worked great

As expected, on time.

Works well for my application. I had to cut off the connector and solder the wires directly to the controller (not made by Orbit).

I can confirm the other review about using it to fix an old DIG 7001 battery hose timer/valve.The latching solenoid on the device did not hold the plunger in place after the opening pulse. I don't know how a magnet goes bad, but that is apparently what happened. Like the other reviewer, I experienced the new one being bigger so everything didn't snap together, but some tape worked for me. Note, the threads are the same, it is just the body of the solenoid that is bigger. If you take the old solenoid off and the plunger doesn't stay in when pushed in manually then it is defective.The packaging says it is for 13v devices, but the 9v of the DIG 7001 works fine. You will need to cut the wires and solder it to the old wiring, as there is no connector. Suggest using heat shrink tubing on the solder joints

My underground irrigation wire was somehow damaged and i needed to buy a battery operated timer, these are to replace the 24v AC solenoids with DC solenoids, the work great

Maybe I got lucky, but this item worked perfectly for me. I have an old DIG battery-operated timer, model 7001. The solenoid went out, and the model has been discontinued. I couldn't find a direct replacement (or, rather, I found what MIGHT have been the right thing, but it was too expensive). So I took a chance with this one. I was a bit disconcerted when it arrived, because it indicated "9 to 30V", while the prior one said only "9V". But I wired it up, red to red, black to black. Made sure the battery polarity was correct (important for a latching solenoid, like this one). And it works like a charm. The one slight issue is that it is a little larger than the original, so the main timer casing cannot snap onto the holder properly. But it is still possible to push it in much of the way, so it'll be perfectly stable unless someone nudges it.The latching solenoid is nice - it may prolong battery life, because it requires just a pulse of electricity to shift the solenoid to the open position, then another pulse to release it (a non-latching solenoid requires constant power to hold it open). So, I'm a happy camper.

Great quality!

I have received and returned this item twice because the solenoid adapter is not included. What you see in the picture with the gray ring in it is not included and the valve does not work without that piece in the DC battery operated valve.Amazon customer support was great to replace the parts the first time and the second time to waive the cost for these parts however the description and the picture is totally incorrect.

Is very very good and original items smart of orbit

Exactly the fit for my existing Orbit controller as a spare.

لكن مبالغ في سعره 87 ريال

Worked

This was perfect as the old electric system was broken and had no power point. Plugged these in to battery timer and worked a treat.