Retractable Tie Down Anchors for 1995-2018 Ram, 3000LBS, 2Pcs

It was easy to install

Perfect fit for my 07 dodge ram slt. Exactly what I was hoping for as far as looks, seems well made and sturdy, and it was an easy install. I haven’t used them yet, hopefully I don’t have to come back and change my review 😬.

As advertised

These Tie Down Anchors are the only ones to buy!!! As the top plate is aluminum. Do NOT purchase any others unless they have a high quality metal top plate. Two others I've installed from Pro Grip and Bull Ring are hot garbage! Both of those have an entirely upper plate that is plastic. If your intent is to hold down a bungee net, go for the plastic type. However, if your goal is to secure proper loads such as dirt bikes, compressors, furniture, etc. and are expecting at least 50% of the ability of the OEM hooks in your truck bed get these. The ones with a plastic upper top plate should be removed from the market place immediately. 4 stars as the fasteners should be button head Torx vs JIS or US Phillips. Since I have a powersports shop I replaced the "Phillips" with M6-1.0 x 20mm. The provided fasteners were 18mm long, and there is plenty of clearance on the top bed stake holes on my 2010 RAM 1500 TRX4 for the slightly longer fasteners. Apply aluminum type anti-seize to the fasteners when installing or expect them to corrode. Attached photos are of the crap plastic models compared to the Tigerracing "All metal" models along with a proper Torx fastener.

These bed tie downs are very well constructed and a great design. All stainless steel and aluminum. I just purchased a 2026 RAM 3500 Big Horn with the plastic cap on the bed rails. I was looking for tie downs for the stake pockets and these seemed to be the best design but the description says not good for RAM trucks past 2019. I bought them to see if I could make them work and they ended up working just fine on my truck. There are two compatibility problems that these tie downs have with my truck both related to the plastic bed rail cap. 1. The hole in the plastic bed rail cap is just a little too small for the tie downs. The length of the pocket is pretty close at about 1.95" but the width of the stake pocket in the bed rail cap is about 1.35" while the body of the tie downs is about 1.45". For the first couple of tie downs, I ground the aluminum body down to fit. Then I realized that I could just sand the plastic of the rail cap inside the stake holes. This was a lot easier and quicker. Note about 1/10" of material must be removed. 2. The plastic of the bed rail cap goes into each stake pocket hole between 0.5" and 0.75" depending on which hole it is. The actual metal part of the bed rail is only about 0.25" down. If you do not cut the plastic back to about 0.25", then the tie downs are only clamped against the plastic and not the metal which is not what you want. I used a multi tool and trimmed the depth of the plastic into each stake pocket hole to about 0.25" which allowed the clamps to firmly clamp against the metal and be installed correctly. This was very quick and easy with the correct tool. It is a little intimidating grinding and cutting on a brand new truck but it is only the plastic part of the bed rail which goes into the stake pockets holes that need to be modified and the modifications are all inside the stake pocket holes. I am really happy that I took the chance and figured how to make these work with my truck.

Easy to put on and works good so far. Got them to cover the hole and help with tie downs from the top of bed.

On our 2012 Ram we were replacing the old bed cover with a narrower design that left the bed pocket holes open. For a cleaner look and to help have water resistance into the bed we were looking for a means to cover the bed pockets. The only items we could find for a Ram Truck were these Tigerracing tie downs. We liked that it gave us both a clean finish and the functionality of addition tie down's. Installation needed a bit of 'force' with a rubber mallet - only to get them to align snugly with the new bed rails. The Rear installation does not allow the metal anchor quite as much pull - we think the material on the rear hole is thicker. It is sufficient, however, to get a good might and still be funtional.

Good quality. I had to file them down 1/16" to get them in the stake holes.

Easy to install Worx great

They were Easy to install and look good once in. Have already used them and work great.

These tie down hooks are a good product that is strong and will do the job, but you may need to do some minor modifications to get them installed. I put these on my 2015 Ram 3500 and needed my dremel tool to cut out a little of the plastic factory runner across the top of the box to get them to fit properly. It's not a difficult task, just an extra step. They sit mounted on top of the runner so not flush but still looks good in my opinion. Also, they have installed nice and stable with no sliding like one of the videos another buyer has shown. That person either didn't tighten the screws enough or damaged these hooks some other way when installing them. I put a good amount of hand torgue on these screws and that's all it took to get them nice and secure. These tie downs will definitely do the job for me. Happy with the purchase.

install on ram 1500 2017 slt. Easy to install and convenient for ancrage point

Item as described