This repair kit supplies the capacitors and resistors needed to repair the power supply board inside a Samsung SyncMaster 245BW LCD monitor. This repair kit is for the power supply board pictured above. Please verify that the power supply board inside your LCD monitor or TV matches this power supply board before ordering!PLEASE NOTE: You are not purchasing a power supply board, only the capacitors needed to repair it!If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors- Flickering screen- Screen image disappears after several seconds- Dim screen- Slow start- Power LED on, but no picture- Unusual colors and/or linesThe primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.If they appear bulged on top, then they need to be replaced.New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.We only use the highest quality Panasonic, Nichicon and Rubycon capacitors in our repair kits.This Samsung SyncMaster 245BW monitor repair kit contains 15 capacitors and 3 resistors needed to repair the power supply board inside your Samsung SyncMaster 245BW LCD monitor. This kit does not include the large 400-450v capacitor, that capacitor may be purchased separately.We only use high quality capacitors manufactured by Panasonic, Nichicon and Rubycon in our kits. We do not use CapXon capacitors.Links to online instructions will be included with the kit.If we don't have a kit for your LCD monitor or TV, we will gladly assemble one.
B**O
Start by replacing the resistors first, then proceed with replacing the Larger Caps next.
I used these to fix my Samsung 245BW monitor. Start by replacing the resistors first, then if it does not work, proceed with replacing the caps that look bad (discolored, bulging etc), then go on to the larger caps next. I considered replacing the resistors but they tested ok with my ohm meter. So ...I started replacing the caps ...biggest ones first. After replace the 8 big ones (1000uF, 2200uF etc), I reconnected the power board to test it...NOTHING! So...I proceeded to replace the three 68 ohm resistors and the rest of the caps. I replaced All of the caps except one of the 47uF caps. One of the 47u was sent with the wrong voltage rating, so I picked the one that looked the best (no bulging or discoloration etc), left alone, and replaced the other one. After replacing the resistors and the rest of the remaining caps, I reassembled the monitor, plugged it in, and WALA!...it worked. It took about 3 hours. I should have started with the resistors first...I might not have had to replace so many caps.
C**A
Worked perfectly.
This kit worked great for my SyncMaster 245BW LCD. My capacitors seemed fine and I just replaced the three resistors. I'm no expert with a soldering iron or electronics repair and still muddled my way through the repair fine.
Z**W
More than I needed, worth the time saved sourcing individual caps
My monitor has been on the "fritz" for a couple years. On a whim I searched for a cap kit and this came up. Only needed two of the supplied caps, but not having to pore over ebay/aliexpress/digikey and cracking my panel open to get the right cap values was worth my time.Cap kit showed up fast, took me about 15 minutes to perform the fix, that included unmounting the monitor from the wall mount.Will hang onto the extras in the kit I didnt need for future projects.
P**.
Worked great.
Monitor was slow to turn on for a couple of weeks and the completely refused to power up - no power LED or anything. Looked around online and sure enough, capacitors seem to be the most likely thing to die on this. Replaced all the resistors and all but one of the capacitors that came in the kit and my previously dead monitor works perfectly again. Much cheaper than buying a new monitor, especially since this one still works great otherwise.
P**R
Easy and quick fix for me!
I ordered this kit to fix a Samsung screen that no longer worked, After a visual inspection, I simpl changed the 3 2W resistors and the screen is back to working condition, Nice to know I have the other replacement caps in the kit, to prolong the life and will replace them later when the time comes.Would also recommend to others without reservation.
A**R
Luckily I'm smart enough to figure out how to use the incorrect ...
Luckily I'm smart enough to figure out how to use the incorrect caps that I was given to make the monitor work. I should have just bought the caps separately for much less money.
W**D
Five Stars
I didn't need anything except 1 resistor, but that one resistor got my monitor back up and running.
L**E
Love the product!
This kit was complete and fixed my monitor! Thank you for putting this great kit together for us, it made my life better!
Trustpilot
1 month ago
5 days ago