Hisencn Repair Kit Replacement for Kitchen Aid 720-0819 720-0787D 720-0819G 720-0953 720-0953A 730-0953 Gas Grill Model, Stainless Steel 16.5 inch Grill Burners Tube, Heat Plate Tent Shield Deflector

It fit my Kitchen Aid grill.

Worked great in my kitchen aid outdoor grill

These fit well but they're a little flimsy. Not a big deal, but beware that the edges of the flame tamers are SUPER sharp- I cut myself just pulling them out of the box.The flame tubes are not an exact match- they lack the hole for attaching the screw in the front and they don't have a proper spot for the retention clip in the back, but overall they still fit.Just use a bit of coat hanger or wire to fasten them down in back just to be sure. I recommend doing this to make sure they don't get dislodged if you bump the grill.The screw in the front isn't really required since the tubes fit onto the gas outlets, which will prevent them from popping out at that end, but fasten the back down with something.The tubes and flame tamer are made of pretty thin material but should last for several years. You could buy 4 or 5 of these sets at ~$22 before you'd hit the price of the "genuine" replacement parts (which are insanely expensive for what they are).Overall a fair rebuild kit for the cost. No complaints, and I'd buy another set in 4 or 5 years when these finally do fail.

Fits like a Glove…No installment problems..BBQ works like Brand New!!

Everything fit but the holes allowing for gas ignition when turned on don’t line up to allow for ignition. The burner tubes for this model need smaller holes around the ignition point. Easily returned.

Purchased for double burner kitchen aid. Perfect

What's there to say. The old shields were destroyed from the gas fires and needed to be replaced. Thanks for making it so easily available.

I don't often return things but these pieces were an immediate fail! The top shield pieces are very light duty, thin metal and much smaller than OEM. They don't fit well. The tubes also don't fit well and never let the gas flow properly to ignite. I ended up putting the original tubes back in.