[2 Pack] Flashlight Holder, Mount Bicycle Mounting Bracket Flashlight Holder Torch Clip 360º Rotation

I bought this for our bikes, and it seems good and durable. The only issue I'm having is assembling it, especially with the two orange plastic or rubber pieces that help with spacing. We put our flashlight in, and it fits perfectly, but those pieces are giving me trouble. What I love most is the ease of adjusting the flashlight—my kids didn't have any trouble with it.

Nice and cheap.Do hold single cell 18650 and 26550 flashlights to the fork of my bike with only simple modifications for the latter. Plastic inner shims kinda stiff and difficult to click into place, helps to warm them up a bit and apply a non petroleum based lubricant (I used refined cocoa butter, worked like a charm.) Can be ratcheted on the fly in ~ 8° intervals to direct a flashlights beam to the desired angle of attack. Quick release levers kinda fiddly and metal hardware seems to be chrome plated steel which rusts a bit with prolonged exposure to the elements.Update: For use with single-cell 26650 flashlights, recommended to open the channel-locks all the way and switch out the thick default click-lock shims with the single pair of thinner ones you’ll find loose in the box. These lack prongs to hold themselves in place when the clamps are opened, so my advice is to line with 3M VHB™️ double stick tape, trimmed to fit as shown in pic. The 3M sticks a lot better to its own plastic backing and to your fingers than it does to the shims so is a real PITA to work with but still worth the effort for the amount of frustration it will save you in the long run. Bonus, thickness and compressibility of the tape increases spring in the clamps when tightened around a flashlight, making the QR levers a lot easier to operate. If you’ve already lost the spare shims though or need better grip and compression around your flashlight, another alternative is to cut your own from 3M Electronics Self-Stick Rubber Anti-Skid Pads — marketed here on Amazon under the brand name ROOS. Their resilient composition, super sticky adhesive backing and grippy siliconized surface lend them ideally to this purpose. Just slice into strips 3/4” (20mm) wide and cut tabs/notches to match the interior halves of the clamps, peel off backings then press into place (see pic.) Easy-peasy.Do wish a similar mounting bracket were available in aluminum alloy with siliconized rubber shims, would gladly have paid triple the cost here for a higher quality device. Still, not bad for the price, especially with above mentioned mod.

Great product!

These worked great for the money but the shins are extremely annoying. They are difficult to get in right and are made of a harder plastic instead of rubber so they don’t do to good of a job keeping the mount from rotating on the bar. The entire thing is plastic so we will see how long it lasts. If it turns out to be durable, I’ll upgrade to 4 stars. Still a good buy and I would recommend them unless you are very hard on equipment.

This is a great idea for a bike. Can use as a headlight when riding, the take the flashlight with you at night.Easy to install, and very sturdy construction.

What follows is the mistake that was hidden, then discovered at the second order of these clamps arrived yesterday. When pressing in the sleeve cushions, it was noticed the slotted hinge point with 3 positions for alternate size needed. One needs to align hinge pin to slide select next option, and position chosen stays locked. Quite Clever I must say, and glad I ordered an extra set, badly needed for wire rack spot light now mounted to its 1" corner posts.---------------------------------------------Previous message:These are Great Clamps, and more compact than expected. Some members having issues with inserts falling out simply didn't get them in place correctly.As Stated in Specs:Adjustable clip size, suitable for body diameter from 0.7 to 1.5 inch.Suitable for holding most LED flashlights with the body diameter from 18mm to 38mm.Not Quite - I was hoping it would fit stem size of 1-3/8 - 35mm.Not w/o modifying with a little Dremel action on clamp to let clevis lever get seated in place then Lever flipped to lock in place. Maybe if forced with water pump pliers, but possible damage risk.Mounting clamp on slightly smaller 34mm section of handlebar mount. No inserts used, and Lever screw just made it into pivot nut. If tube is 35mm, lever screw would not reach pivot nut.Mounting Highend LED flashlight with Tele zoom Spot to Flood was perfect, with 1.0 inch body.* Make sure inserts are mounted and pressed in correctly, or they will obviously fall out.The inserts have location tabs that get pressed into place within the clamp. The tabs on back side of inserts are specific size to only go one way into clamps recessed pockets.The clamp needs to be opened fully to insert them correctly.At 18mm - 3/4" to 34mm its fine. Those skilled with Dremel can modify where needed if tube is slightly larger than 34mm.Glad I ordered twin set, so gal next door got a clamp mounted as well.For sure a another set is needed to mount other items.

If I could rate this product on design, I'd give it 5 stars. The design is versatile and practical. The material execution is garbage. You may as well go to the 11-year-old next door and ask them to 3d print something similar. The build material feels brittle out of the box and has only suffered with exposure to the sun.I didn't expect a great deal based on the price, but it's like they didn't even try. It's not like a pair of pants that has some bad stitching, it's like the pants just come with gaping holes over vital body parts and the seller attempts to sell that as a feature.

These work...so far, but are all plastic. I purchased with a plan to use an led light for a mountain bike. This worked fine for a temporary fix. The orange inserts are softer plastic, which does allow it to tighten firmly. Rubber would be better, in my opinion. I have since bought an actual led light system for my bike, which mounts perfectly. I keep these in my bike bag as a "just in case i need" tool.

holds flush light well - had noise like others reviewed but disappeared by just tightening couple turns

Pro: Hold a flashlight on your bicycle handlebar, if your flashlight is not too heavy. Cheap replacement to expensive brands.Cons: Lots of wiggle from the 360-degree pivot, very annoying when you ride. Not design to be installed or removed often. Very bulky.