FRESH SPEED 6-Inch External Extractor Wall Vent Cushioned Non Return Flap

Good practical vent. Easy to install and fits well. Looks great and functions well. You just need to put a bug screen in behind the backdraft damper as it doesn’t come with one. This is optional but I recommended it.

Cumplió completamente con mis expectativas.

This was impressive right out of the box - the packing itself I would add was really tough box offering max protectionOnce installed, the clean lines and Stainless finish looks very classy on the exterior wall.I understand why some might have been frustrated with the rubber gasket, which is slightly smaller than the frame: however I personally think this was a positive thing. TIP: a little bit of SuperGlue on the corners was enough to secure it firmly in place. Then you can easily snug it up tight against the wall for a tight seal.The Flapper on mine fit well and moved freely; and when held off-axis slightly you could see it seal nicely - the gasket is a bonus here, to dampen any banging! When mounted however it did hang ever so slightly open - this is more a factor of the wall's true verticality though. Perhaps a suggestion for the manufacturer is to recognize that many will have this issue - if it was designed with a built-in internal angle of only a few degrees it would solve this without any negative impact on the functionality.The only other thing I found was the mounting screws were too short for me - Mine had to go through the Dryvit Stucco into the plywood sheathing, so with the thickness of the vent itself (which is nearly an inch) I needed 2-1/2" screws. It would be a bonus if the manufacturer could supply a few different lengths to accommodate different wall thicknesses.Very pleased though, an incredible value I would say.

Get your lint-free microfiber towel ready to handle this thing and rubber or latex gloves because the finish is so nice and shiny with a light brushed finish. SS they say but thin. But should last longer than crumbling plastic ones. Screw quality unknown but no anchors included. Not sure yet how I will fasten to the wall. Or how it fits in old Vent flange yet. Does take 2 to put on the C shaped seal. Someone to hold first 2 corners.

This is solidly built and worked as stated. The non-return air flap actually works, opens and closes. it is ascetically acceptable and had no dents, scratches or blemishes.