Victron EnergyBMV-712 Smart Battery Monitor (Grey)

Victron EnergyBMV-712 Smart Battery Monitor (Grey)

Q: I'm a total tech illiterate, does it come with everything one needs to fully install the meter or one has to purchase other things as well? thanks

Hello, C. As I recall, everything you need is included. You will have to connect it to your battery bank, mount the shunt nearby and run the included wire from there to the monitor itself. There is probably a .pdf on the Victron website that has everything you will need to know. It's a very well made device and worth the higher price. Best wishes!

Q: My house batteries are up under my E-350 van, and are therefore exposed to the elements while driving along. OK for the shunt to be down there, too?

There is a RJ-45 connection that is not intended to get wet, so having it in an unprotected location is probably not a good idea, especially if road salt could get to it. If you can bring the battery negative cable into the van, that would be much better, or else use a weatherproof junction box.

Q: I have two 12v 31-series agm batteries wired in parallel. can anyone provide info on how the negative from the battery should be wired to the shunt?

After the two batteries are connected together, the negative from one of them goes to the shunt, and nothing else. The other side of the shunt goes to the negative bus bar, chassis ground, etc. It's important that no loads or charging devices connect directly to the battery negative, otherwise the flow will not be monitored by the shunt.

Q: I have just installed a victron 75/15 mppt & would like to install a display that does both 1) display battery level 2) show solar panel live status

The monitor will show current state of charge of the batteries. You can then scroll to the current inbound or outbound power in amps. The number will be plus showing net power from the panels minus current load. I hope that helps.

4.7/5

Produkt-ID: 253962820

Sichere Transaktion

Details

Brand
Victron Energy
Power source
Battery
Colour
Gray
Item weight
0.74 Kilograms
Alarm
Audible

⚡6.5-70 VDC voltage range

📱Built-in Bluetooth wireless monitoring

🔄Programmable relay for device control

Häufig zusammen gekauft

Victron Energy BMV-712 Smart Battery Monitor (Grey)

Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 30 amp, 12/24-Volt

Victron Energy Orion XS Smart DC to DC Battery Charger 12/12 50A (700W) - IP65 Dust & Waterproof - Fully Configurable - Remote Management Possible - Advanced Battery Protection

Beschreibung

🔋 Stay powered, stay connected — the smart battery monitor for the modern pro.

SMART WIRELESS ACCESS - Seamlessly track battery status on your smartphone or tablet via built-in Bluetooth.
DUAL INPUT FLEXIBILITY - Measure battery temperature, midpoint voltage, or a second battery with an additional programmable input.
AUTOMATED CONTROL RELAY - Program the integrated relay to manage devices like battery protectors or generators effortlessly.
GLOBAL MONITORING READY - Connect to GX devices and access real-time battery data worldwide through VRM platform.
PRECISION VOLTAGE MASTERY - Accurately monitors battery voltage from 6.5 to 70 VDC for ultimate system reliability.

The Victron Energy BMV-712 Smart Battery Monitor is a high-precision device designed for 6.5 to 70 VDC battery systems. Featuring Bluetooth connectivity for wireless monitoring, a programmable input for temperature or secondary battery measurement, and an integrated relay for device control, it enables real-time, global battery management when paired with GX devices and the VRM platform.

Spezifikationen

Item Weight	0.74 Kilograms
Power Source	Battery Powered
Material Type	Plastic
Color	Gray
Style Name	BMV 712 Smart - Bluetooth

Haben Sie eine Frage? Sehen Sie, was andere fragten

I'm a total tech illiterate, does it come with everything one needs to fully install the meter or one has to purchase other things as well? thanks

My house batteries are up under my E-350 van, and are therefore exposed to the elements while driving along. OK for the shunt to be down there, too?

I have two 12v 31-series agm batteries wired in parallel. can anyone provide info on how the negative from the battery should be wired to the shunt?

I have just installed a victron 75/15 mppt & would like to install a display that does both 1) display battery level 2) show solar panel live status

Häufige Fragen

TrustPilot

TrustScore 4.5 | 7.300+ Bewertungen

Daniela G.

Die Produktqualität ist hervorragend. Genau das, was ich für meine Arbeit brauchte.

vor 1 Monat

Anita G.

Gute Erfahrung, aber die Tracking-Updates könnten besser sein.

vor 2 Monaten

Sehen Sie sich alle Überprüfungen von TrustPilot an

Kaufen Sie weltweit ein und sparen Sie mit Desertcart

Preis-Leistungs-Verhältnis

Wettbewerbsfähige Preise für eine große Produktpalette

Kaufen Sie weltweit ein

Wir bedienen über 300 Millionen Käufer in mehr als 200 Ländern

Verbesserter Schutz

Vertrauenswürdige Zahlungsoptionen, die bei Käufern weltweit beliebt sind

Kundensicherung

Vertrauenswürdige Zahlungsoptionen, die bei Käufern weltweit beliebt sind.

Desertcart-App

Shoppen Sie unterwegs, jederzeit und überall.

€ 390.87

Zölle & Steuern inkl.

GERMANYspeichern

Kostenlose Rücksendungen

30 Tagefür PRO-Mitgliedschaftsbenutzer

15 Tageohne Mitgliedschaft

Sichere Transaktion

TrustPilot

TrustScore 4.5 | 7.300+ Bewertungen

Sneha T.

Habe mein Produkt in makellosem Zustand erhalten. Insgesamt toller Service.

vor 1 Monat

Rajesh P.

Der Kundenservice war hervorragend, als ich Fragen zum Produkt hatte.

vor 2 Tagen

Sehen Sie sich alle Überprüfungen von TrustPilot an

Über uns

Kundendienst

Kundensupport

Regionaler Zugang

Rechtliche Hinweise und Richtlinien

Sozial

Holen Sie sich die App