Master Airbrush Extra Large Dual Fan Portable Airbrush Hobby Spray Booth with LED Lighting - Portable Paint Booth with 6' Exhaust Hose, 22.25"x19"x14", Turntable, 25W Fans Powerful Extraction, Model

Great little paint booth. Lights are very bright and the whole booth packs up easy for moving around. The fans are a little loud but move tons of air. I have used this with acrylic air brush paints with great success. I have also used this for electronic soldering and ran the vent out the window.

I love how wide it is and how good the lighting in this is! You can totally paint minis in this if you need to as well! The hose is pretty stiff, so I replaced it with a 4 inch duct for my outside fittings!

I'd probably rate this a 4.5 given more granular controls, as it's not a perfect booth, but a good spray booth, and it works well enough in my restricted space, and does a good job of pulling the excess paint in the booth through the filter. The plastic will catch and show a lot of color if left uncovered, but it is easy to wipe clean as long as you don't let it sit overnight. The airflow is nice, if a bit noisy, but quieter than my air compressor, and the single fan setting is good enough for lower flow spraying sessions.The air hose has a nice firmness to it, though you'll want to be within a few feet of a window. The lights work pretty good, and cast and even if somewhat cold-ish light on the working area. I haven't noticed terrible color issues with the light the booth provides, but there is a pronounced shift to watch out for.All in all I am satisfied with the booth's durability and performance for my needs. Improvements would include noise baffling for the fans, and the ability to control the color temperature of the LEDs to better help judge finer finish details when working in an environment dealing in color!

I don't normally right reviews because I take most reviews with a grain of salt and a twist of skepticism. I am honestly impressed with this spray booth. I'm using it for indoor use of spray paint in the dead of winter. There are almost no fumes while working or when leaving the fan going to help keep the smell down while waiting for the paint to dry. Definitely do yourself the favor of covering the turntable and maybe even the inside of the booth in something to help keep the paint off. I don't want to think about trying to clean paint off of any of the surfaces, especially the turntable. Some people complain about the fan being loud, but it's the same as a box fan on high and if you want to use spray paint inside and not have the fumes be overpowering, it's a worthwhile trade off. The both itself is a bit thin, but that helps keep the weight down for the portable part. I would not recommend doing excessive travel with this, but that's just my preference as I don't want to take the light bars apart and also I won't be needing to take this off of the desk I have placed it on.

The media could not be loaded. Would highly recommend! Works great when on the second fan setting which is considerably louder, single fan is great for after your done working on your models to get rid of the residual smell, also works great for after priming it keeps the smell from leaking everywhere which is nice. Putting together was a little difficult at first as the directions aren't super descriptive. While using single fan is about as loud as a 3d printer/floor fan on setting 2/3 with both fans about half as loud as a leaf blower. LEDs are probably the best I've worked with even with the plastic covering on they give great lighting!

This is a very nice paint booth. What I like best is the fact that the lights and exhaust fans can be operated all together or individually. You can operate the lights by themselves. Or the lights and 1 fan which is how I usually use it. The fans can be rather loud. That's why I only use 1 most of the time. 1 fan is similar to a bathroom exhaust fan. Both fans are similar to a vacuum cleaner. The lights are great. They illuminate the entire booth. All in all, it's a very nice booth.

I was a little skeptical after reading some reviews. I received the item on-time and had no problems out of the package. Everything was there in new condition and worked once assembled. will update if there are issues in the future.

A LARGE airbrushing cabinet. I can get virtually any model part I need to paint in it. The fans are good, the lighting is well placed and the controls are easy to get to. The fans are a bit noisy but not as noisy as my compressor so it work out okay. Finding a way to exhaust the fumes and overspray was an issue as there is no built-in method to get it out of the room. I ended up cutting a hold in the drywall in my garage and vented into the wall. It works but I imagine the insulation will eventually have a heavy paint smell.I would recommend this cabinet to anyone who does a lot of airbrushing with the single caveat that you will need to plan for the exhaust placement.