Rayhoo G4 LED Bulb Socket Halogen MR11 Base Ceremic Lamp Holder Socket, Miniature Bi-Pin Base Socket, Halogen Incandescent Led Socket Ceramic Body Lamp Holder, 10-Pack

Long leads ready for solder. I have been running them continuously for weeks and they are good. No flicker.

I use these to rebuild landscape fixtures in our adjacent marine environment. This is the second box I've purchased. First box was used up 3 years ago and those sockets remain in good condition.Connections remain tight and no corrosion.

Exactly what I ordered Price was right and the product is very well made

I converted a two lamp fluorescent fixture to a ten LED lamp fixture. After putting it all together, one of the sockets would not retain the wire of one pin when the lamp was inserted. I managed to get the lamp plugged in and it works. I probably should have undone all the stuff and replaced the socket, but...On an up note, the package of 10 sockets I opened and used had 11 sockets in it. Maybe that was why?Generally happy with my purchase. I will test the sockets before installation on the next project...

I used this LED sockets to modify my landscape lighting since manufacture pull the fast one on consumer. That means when its led bulb burnt you have to replace the complete light set ($24.99/each). So I decided to upgrade mine with this little guys with new led. I used the same brand name of RAYHOO for Sockets and LED Bulbs. With a bit of work I replace my landscape light bulbs total of 4 which would cost me about $100 if I replace it with original ones. This cost me less than $30 and in top of it I still have 6 more sockets and bulbs remaining. Excellent product both bulb and socket. I have them tested now about a week and are working great.

I've a large number of landscape lights; they typically get a lot of moisture inside, and the sockets corrode or jam over time. The contact-metal of these Rayhoo ceramics looks more substantial than the previous sockets I've used as well as the original sockets; I expect they'll last longer. The shape of the pin-entry is better defined for easier insertion.Note well: in my picture you see the base broadly cut away around the two bolt holes. Other sockets I've used (and the originals) had solid bases - discs that were flat on the bottom, with two bolt holes. The Rayhoo base has a minor problem with a few of my bollards where the mounting platform's bolt-posts didn't fit in the cut-outs; using a long bolt made that irrelevant.

Excellent item Flash Delivery THANKS

Good. Stranded wire is a little difficult to work with.