Ringke Dual Easy Film [4-Layer Protection] Compatible with OnePlus 13 Screen Protector, Self Healing Repair Coating Full Coverage Screen Protector - 2 Pack

Would e given 0 stars. Directions are completely confusing. Impossible to install with out bubbles. Ruined 1st one because instructions unclear. 2nd one is on there, but many bubbles. Would not recommend. I should've known better and paid more money for a better brand .

Honestly I think people have lost patience, listen it's not the easiest install but it's also not the hardest. You just have to really take your time when apply the screen protector. Also make sure your work area is clean and I even wore some nitrile gloves as an extra precaution. Let the phone sit for the full days and the small bubbles will completely go away and the line you see in the middle of the screen. I've tried the tempered glass for the OnePlus 13 and it just doesn't work due to the curved screen. But this one covers the screen fully and still allows you to text easily and it feels like it can provide your phone screen the needed protection.

I bought these long ago and they sat unused as I left the factory screen protector on for almost a year. This is my first screen protector that came with an alignment jig. I'm used to carefully aligning an adhesive sheet, then dropping it onto the screen hoping to getting it right. I read the directions and thought I understood the process, but was disappointed. I thought they sent me the folding phone variant because of a horizontal line in the middle, but proceeded to do the install anyway as I had just removed the factory cover and wanted something on the phone until I could order something else. I had huge bubbles and mysteriously had dust trapped where there was none when I started. I reread the directions and realized there was another step I was missing. Watched the online installation video and it all became very clear. 30 seconds later and the screen protector was installed and almost perfect. I'm going to deduct one star for the packaging instructions being unclear and one bubble after the initial install. I'm hoping it goes away in time as the instructions promise. It is located under the #4 tab so I couldn't see it while smoothing the rest of the protector. The screen is crystal clear. Scrolling feels smooth and slippery. Fingerprint reader works as usual. I don't use the selfie camera often, but having the protector over the camera doesn't appear to affect the photo quality. The small cut out in the factory protector was a spot for dust to collect so I appreciate this detail. So overall a really good screen protector that suffers from poor instructions.

Wish I read the comments before buying awful instructions and terrible way to apply it. Both came off the jig too easily as I was taking off a layer and went crooked and trying to eyeball it to get it straight just added more bubbles that could not be taken out by the squeegee no matter what I tried. Awful

If you're having issues with the install of this protector, have patience and watch the install video of the protector on the product page. After viewing that video and following along, the installation of this screen protector was smooth and I had minimal air bubbles that dissipated within 24 hours of installation. As a side note, if you're coming from the stock screen protection film, make sure that you remove that film and then immediately place the new protector down on the phone to help minimize any kind of dust contamination. I would suggest also to place the screen protector guide into the usb c port prior to removing the stock film. This protector also has a built in kind of dust remover with the first section of the process. Just remember patience is key with this type of plastic protector.

You need to be careful installing these types of screen protectors as the film is not solid and will warp easily. First install I had multiple bubbles close to the edges. Was able to scrub a few out, but ended up cutting a hole in the protector. Second install was much smoother. Still not a big fan of the noticeable line left across the screen. My advice while following the instructions, when installing each halve, apply pressure short of the halve while attempting to remove the second and third tabs. Then apply a good amount of pressure when sliding the tabs out with the squeegee. If you have a curved screen, after removing all 4 tabs, go back through with the squeegee and with outward strokes push down the edges so the film applies to the curve. I always thought a second protector was supplied in case the first broke, but this one I'm convinced the first one is provided as a test install.

Straight up garbage. I followed the instructions that came in the box. I pull tab one and as I peeled it, it just ripped in half ruining the installation. No worries I have a second one. Second attempt. No dust, super clean screen , no nothing. Screen protector made the phone unusable, bubbles everywhere, used the included squidgy and would not remove the bubbles. Never had issues installing a screen protector before.

I have putting on screen protectors for years, tempered glass and film. I know what I am doing. This one would not install without bubbles that wouldn't come out. Also it is not smooth feeling. Very rubbery feeling on the screen.

Terrible product which is overpriced and overrated. I ve been using ringke case for my oneplus 13 for more than 8 months and it is perfect in every sense, the trust was extremely broken when I received the dual easy film for my oneplus 13, it is not an easy task for applying but also leaves a line across the screen even I was fully aware of the product application and take well care during the process, still it leaves a line across the screen which is annoying, the suprising part is the product is highly overpriced for such kind of cheap product.

I am very disappointed with this product. You get 2 in the pack and I have used both of them. Both of them have a line in the middle where the 2 pieces of the protective cover meet. Although the description mentions those the line does not go as it says it does. Also the application of the protective cover is so difficult it is almost impossible to not get bubbles. While the second application was much better than the first attempt due to understanding what the process was I sill have 6 bubbles which I cannot get rid of. This is going to need to be replaced. My advice is to buy a different protective cover as the application for this one is too difficult for it to not look like a mess after.

Oneplus 13ですが、マイクロクアッドカーブディスプレイを採用しており、 四辺全てがR面となっております。 非表示部がカーブしてるだけなら良いですが、Oneplus13は表示部からカーブしています。 エッジディスプレイよりかは緩やかではありますが、 表示面の四辺が全て緩やかなカーブとなっている為、 必然的に保護フィルムの選択肢が狭まります。 硬化フィルム系は全面保護するものは無く、ガラス系もエッジ部は接着剤が無い、等。 こちらの商品はEPU素材なので完璧に全面保護してくれます。 ですが、やはりガラス系と比べたらスクラッチ耐性は弱いので、 定期的な張替えが必要になるかと思います。 曲面ディスプレイの保護フィルム選びは中々難しいです。

There were two in the set. I used both, but it was a waste. Please don't buy.

Die Folie an sich ist top, allerdings war eine davon defekt. Beim abziehen des ersten Tabs, gemäß Anleitung, ging ein Tab zu viel mit ab, da diese scheinbar nicht richtig abgetrennt waren und zusammenklebten. Dadurch konnte ich die Folie nicht mehr ordnungsgemäß anbringen und musste eine von beiden entsorgen. Somit leider nur eine funktionierende Folie zum Preis von zwei. Die zweite klappte wie es soll, wirkt auch sehr hochwertig bisher. Hätte gerne 5 Sterne vergeben aber bei halber erbrachter Leistung wird das leider nichts Edit: die zweite Folie hat sich leider auch schon innerhalb von einer Woche an der Ecke oben links gelöst, wohl doch nicht so toll die Folie, schade