JDiction Silicone Mold Making Kit, 2.32lb(37oz) Super Elastic Liquid Silicone for Mold Making, Fast Cure Soft Mold Making Silicone Rubber for Casting Resin Molds/Silicone Molds/Candle Molds/Soap Molds

I've wanted to make silicone molds for years and always found the material to be too expensive. This seemed to be the right price. I've now created multiple molds with this material and have had no issues whatsoever. The molds came out bubble-free and were successful in casting plaster. For ease-of-use and to use less material, this is how I used this kit: 1. Place a container on a digital scale, zero-out (tare) the scale. 2. Pour part A into this container, take note of its weight. 3. Pour part B until the scale reads two-times what it did for Part A. 4. Stir slowly with the included popsicle stick. For a standard soup can, I would make one rotation in 4 or 5 seconds. While stirring, scrape the sides and touch the bottom of the mixing container periodically to ensure all material is incorporated into your mix. Don't remove the stirrer or go fast as it can incorporate bubbles. Finally, pour the silicone mixture very slowly into your mold box but not on the item itself. It is less likely for air bubbles to be trapped by pouring to the side of the item instead of onto it. I held my soup can around 2 feet high and allowed a very fine stream to flow into the box. The overall pouring time was between 3-5 minutes. I didn't use the included silicone measuring cups and feel it is unnecessary for what I'm doing, as well as a potential waste of material (material remains after you pour it, and this stuff comes with a premium). It was too cool outside here for proper curing (less than 70F), so I took a small space heater which measures about 6" tall, placed it in front of the mold, then laid a box over everything, with one side of the box resting on top of the heater. This allowed the temperature inside the box to get quite warm (80-85F - ish), and it cured no problem. Finally, I was able to pour plaster of Paris and cast my pieces which came out lovely. No bubbles in the final plaster product. Quite satisfied with the results and this product.

Perfect set even for beginners! I'm totally new to mold making and I found this set to be very easy to use and the instructions were very clear! The silicone didn't have a smell at all! And once it was fully set it felt like a premium sturdy silicone mold! I'll be using my new custom hand made molds for resin and I'm super excited to make more! I 100% recommend to anyone who is new and experienced! This set is affordable, high quality, easy to use, low bubbles, no odor, non toxic and is translucent so you can even make molds for UV resin!

This stuff is the best I’ve used. I used other brands before and sometimes they left my molds sticky, but these come out perfect every time. I make picky pads to curve my skin picking habits and this product is very helpful!

Works well and created many projects with this size. You cannot create in cool or cold area because it won't cure. Warmer the better for quicker cure time and results. Easy to sand and polish as well. Clear results and adding color pigment is easy.

So like, I saw someone mold an arm and hand so I wanted to mold an arm and hand. The way I did not do my research. This is not safe for skin. That’s what the thing said. The instructions are simple and have photos which I greatly appreciated. For sure the 37oz is great for small projects. I know the hand does not fit in the thingy. I originally had a large cylinder tube because I wanted to make a whole a** arm and hand to practice tattooing but obviously effed around and found out that 37 ounces of fun would not be it for me on this day. As you can see, no bubbles here. Because this is clear, cloudy clear, I did mix in Liquid Silicone Coloring Dye. I was trying to do this peaches and cream swirl. Ma’am. This is difficult. I had a good time though. Our take away: Great for small projects. Self rising bubbles. Not safe for skin. 10/10 would get gallons next time. Also, do research.