CORSAIR 3500X ARGB Mid-Tower ATX PC Case – Panoramic Tempered Glass – Reverse Connection Motherboard Compatible – 3X CORSAIR RS120 ARGB Fans Included – Black

I've probably worked with at least 15 different cases over the years and I would say this one is probably my favorite case to work on things. Every panel is well secured but also VERY quick to pop on and off without screws or tools. Overall it feels like it was well thought out in many ways. I will say the area for the PSU causing the floor of the PC to not be continuous through to the front has grown on me and it makes sense for making the front glass view most excellent. Probably not the best case for lots of travel or as a LAN party case (is that even a thing for people anymore?) without securing those two glass panels. Tons of mounting points for fans and plenty of room to fit my big black rtx5070ti card. Okay so everything has tradeoffs so one of which was I had a hard time securing the built-in GPU support part so it wouldn't be loose but I think that might be user error and with the weight of the card it doesn't go anywhere anyway. Also I don't know if it was user error or not but the included ARGB case fans don't seem to like to work at lower thrust speeds; they just came to a complete halt while some 3rd party fans I installed ran just fine. Last is that this cases uses what I would say is a typical metal thickness for the panels and they have a really neat speedhole pattern allowing max transfer of air molecules, but the drawback is that you can easily use a finger to flex panels on the case. The frame is plenty ridged and it's not like the panels are a car door that you interact with every day to feel it; but this might matter to some of you.

This case completely blew away expectations and turned into the centerpiece of the whole setup. The panoramic glass makes the PC look like a display piece on the desk, and the included ARGB fans give it that “finished” look right from the start without needing to buy extra parts. Building in it feels genuinely smooth and stress-free. The dual-chamber layout hides all the messy cables in the back, so the main side stays clean, and it has plenty of room for a big GPU, tall cooler, and even a serious radiator without feeling cramped. Everything lines up the way it should, and there are enough fan and radiator mounting options to keep temps under control without the system getting too loud. Day to day, the front USB-C, extra USB ports, and easy access to the power button make it very practical to live with, not just pretty to look at. For the price, it feels like getting a premium showcase case without paying a “luxury” tax, and it is absolutely a five-star buy that is easy to recommend to anyone planning a modern build.​

I recently built a new PC using the CORSAIR 3500X ARGB Mid-Tower ATX PC Case, and I have to say I'm thoroughly impressed. I had no issues with the case at all during the build process. There is a ton of space inside for all my components, which made installation easy and stress-free. I also added some extra fans, and there were perfect spots to place every single one. The case came with all the screws and hardware I needed, which is always a pleasant surprise. I especially appreciated the ample space and tie-down points for cable management, making it easy to hide all the wires for a very clean look. The clear side panel is a great touch, allowing me to show off the build. Overall, this is an excellent case for anyone looking to build a new PC. It's spacious, well-designed, and looks great.

This pc case has a perfect size for anything big and small you may try to put in it, amazing functionality. The fan capacity is huge and I fit in 10 fans in this case myself. The cable management is alright, you would have to do the main management (can’t just put the cover or them). The airflow is amazing due to the fan capacity while the noise might get a little loud depending on what fans you install.

I’ve been using the Corsair 3500X for a bit now, and overall it’s a really solid case if you want something clean, modern, and easy to work in without going overboard on size or price. The first thing that stood out to me was the design. It has that minimal Corsair look with tempered glass on the front and side, so you can actually see your build instead of hiding it behind metal panels. It looks great on a desk without screaming “gaming PC,” which I appreciate. The airflow-focused front panel also means it’s not just about looks. It actually breathes well. Building in it was straightforward. There’s plenty of room for cable management behind the motherboard tray, and the cutouts are placed where you expect them to be. I didn’t feel like I was fighting the case at any point, which is something I can’t say for a lot of mid-towers. It supports full-size GPUs comfortably, and radiator support is generous enough that most people won’t feel limited, whether you’re air cooling or running an AIO. Thermals have been good so far. With a few decent fans installed, airflow feels balanced and temperatures stay under control even under load. It’s not some extreme airflow monster, but it hits a nice middle ground between cooling performance and a clean aesthetic. The overall build quality is what you’d expect from Corsair. Panels feel sturdy, the glass is solid, and nothing feels cheap or flimsy. It’s also nice that the case doesn’t feel overly heavy once everything is installed, which makes moving it around less of a pain. If I had to nitpick, I’d say it’s not the most unique case on the market. It plays things safe in terms of layout and features. That said, I think that’s also part of the appeal. It does the basics very well and doesn’t get in your way. Overall, I’d recommend the Corsair 3500X to anyone looking for a clean, modern mid-tower that’s easy to build in and looks good without trying too hard. It’s not flashy, but it’s practical, well-built, and reliable, which is honestly what I want from a case.

Good looking case, a downside is that it only came with 3 fans so I had to buy more, the case is a very big case, cable management wasn’t an issue for me, the glass panned just snap in place no need for screws at all to put the top metal panel on, looks very good with my build, it’s a very heavy case, airflow is decent, has all the ports I need, it was easy to build my pc in, do recommend, it

I love this case. Can't go wrong with Corsair! It has a very nice look to it and good build quality. The cables can be well hidden behind the motherboard and it was pretty easy to build in. Really happy I went with this case for my build.

This PC case is fantastic! It’s spacious, with plenty of room for cable management and even the largest GPUs. Airflow is excellent, and the preinstalled fans are already high quality, keeping my system cool without extra effort. Perfect for builders who want room to expand and a case that performs right out of the box. It is build very well with excellent quality as always from Corsair. Super compatible with any size mobo. Also has removable dust filters that are magnetic.