Govee TV Backlight 3 Lite with Fish-Eye Correction Function Sync to 75-85 Inch TVs, 16.4ft RGBICW Wi-Fi LED Strip Lights with Camera, 4 Colors in 1 Lamp Bead, Voice and APP Control, Adapter

I had very high expectations for this Govee 3 Lite backlight and it surpassed all of them by a mile. This Govee 3 Lite with proper set up, calibration and correct settings looks absolutely magnificent with beautiful and accurate colors that it adds so much to my TV viewing experience. Most of the "bad" reviews on here is USER ERROR because the person can't bother to do even the most basic research therefore he/she doesn't know how to set it up, calibrate and adjust settings correctly. So here are some tips and settings that may help others: For accurate colors it's vital to set your white light accurately first since all other colors blend off of white. Also, ALL of your TV SETTINGS like BRIGHTNESS, COLOR TEMPERATURE, PICTURE MODE, COLOR, CONTRAST, etc. has an impact on the LED strip brightness, vividness, accuracy and density as well. So play around and pause a scene on your TV that's really colorful and then turn your individual TV settings all the way up and all the way down to see how it affects your Govee lights. Now I have an LG OLED and OLED's have perfect black levels and near perfect colors out of the box, so you may not get the exact results I did. But it doesn't hurt to give it a try and see if it helps your Govee set up if you are not satisfied with your colors. 1. Put the camera dead center of your TV and at 90 degrees (or as close as you can). 2. Install the light strip as close as you possibly can to the edge of your TV. I've seen youtube videos where people install them 2" to 3" inward from the edge (I get it if you have no choice because your back panel has a weird shape or is not completely flat along the edges) and that gives such a tiny light spread on the wall and also leads to dead spots in the corners because the light is set too far away and that causes the TV's corners to cast a shadow on the wall leaving a dead spot. 3. When you calibrate with the orange squares make sure the gray box ends up looking either like a rectangle or a bow tie. I added pictures of my actual calibrations of both shapes to my review to give you an idea of what I'm talking about. If your TV is wall mounted or on a TV stand where there's nothing underneath the camera that may interfere with it, I'd probably go with a rectangle shape which is the ideal shape according to Govee. But after playing around with the calibration I discovered that for my set up a bow tie shape gives me the most accurate and uniform colors because I have a semi-glossy TV stand and it helps to prevent the camera from seeing past the bottom edge of my TV and catching whatever colors that are reflecting back up off my TV stand so it doesn't interfere with the actual colors coming from my screen. 4. When you adjust the "color calibration, saturation, white balance, etc." in the app do it in a dark room. 4a. "Saturation" setting needs to be dropped way down to give you accurate colors. I keep mine between 1%-5%. If you're one of many people that's having problems with your white light looking green, dropping the saturation down a lot should fix that problem and give you a nice white light that will go a long way in giving you accurate colors across the board. 5. "White balance" default is 50% but it looks a little too blue on my LG OLED so I keep my white balance a little more on the red side at 70%-75% and I get a nice slightly warmer white that works wonders in getting accurate colors all around. Google "pure white" background and use that to adjust your white balance and saturation. 6. "Relative Brightness" default is 50%. I set mine all the way up to 100% on all four sides and then I control the brightness level with the main brightness slider which when it's a bright room I set it to 100% and when it's a dark room I set it to 47% because that's the percentage I found that when the screen or parts of the screen goes dark so do the corresponding lights which only adds to the immersive viewing experience. 7. If you want your lights to show all the different colors as you watch TV you need to choose "part" in the app. If you choose "whole" you will get only solid colors on all four sides. 8. You can choose either "movie" or "game" but personally I leave mine to "movie" 90% of the time even if I'm gaming. The difference between them is with "game" the colors switch a little faster but that leads to a lot more flickering which can be very distracting. With "movie" it's a softer and smoother transition. 9. I love that I can connect my Govee kit to my Alexa app by adding it in the "skills" section which allows me to control the backlight with voice commands for things like turning the LED strip on and off or the brightness up or down or setting a timer/routine to turn the LED strip on or off at a certain time of day I set. Thankfully I had a few weeks to do a lot of research and also check out youtube videos before Prime Day when I was able to purchase this kit for $46 for the 40"-50" size. And it was in doing this research that made my set up super easy with no problems at all when my kit arrived. All told it took me about two hours from start to finish to install and set up my backlight settings to get it perfect for my LG OLED TV. It took me longer than most people since I went all OCD when figuring out the exact placement, spacing, height and measurements of the lights to get the best possible light spread on my wall and it was all worth it since my LED's look fantastic because I have a full and wide light spread and the colors are so evenly dense with no dead spots in the corners like I've seen on so many other set ups. I was worried that the whole calibration thing would be a PITA since a lot of reviewers seem to struggle mightily with getting it right. For me, it was super simple because through my research I learned what not to do and avoided all the pitfalls that plague others. The proof is in the pudding. I've added screenshots of the settings I use and a sample video with those settings and my lights are mesmerizing and gorgeous. Check it out!

I love these lights. High-quality dynamic backlighting for your TV. With the calibration and settings dialed correctly, it moves and breathes smoothly with the picture as you use the screen. With this installed it really amps up the cozy and artsy vibes of the screen, adding further immersion. It's also easier on your eyes in a dark room to add backlighting. You can set the brightness level to the level you want, and you can fully control the colors and tone, whether you want to set it to something static, add a colored border, or use the dynamic lighting (which is what I'm currently using). These lights were made for 55 inch to 65 inch TVs. There are four strips rolled up, two for the short side and two for the long side. No matter which corner you start from, you will be able to set it up properly during calibration. The strips stuck well so far but were not so firm that I couldn't pull up one strip to reapply it. The TV I have here in the pictures is the Sony Bravia ii OLED 4K panel (~$2000 screen, excellent picture quality for the price point). I am using a Rocketfish omnidirectional wall mount behind it. TIPS I followed some other reviews here for the calibration. It was recommended to set the TV brightness to max for calibration, then adjust both TV and backlight brightness after setup. The physical setup only required me to have a TV pulled forward from the wall a foot or so, plus a 3-step ladder so I could easily reach the top of the TV. You could absolutely install this on a TV sitting a bit forward on a stand as well. App setup was a breeze once the lights and camera were attached properly. I will sort out my cable management eventually, once I have a TV shelf installed below my panel which is my next goal for this room. The kit comes with some additional adhesive to secure the lights that I didn't end up using, as the adhesive on the back of the light strips was sufficient for now. I'm saving the extra parts just in case. Overall I highly recommend it! The dynamic lighting adds so much immersion without being loud or flashy unless you want it to be. Kinda just blends into the background and subtly amps up the quality of your whole experience. Like the color on the picture just blends seamlessly into the wall and the room.

Great way to add immersion to your viewing experience, whether it be watching cable TV or a 4K movie. I went with the 55"-65" version to use on my 55" Hisense U8N. The set up instructions aren't clear on a few points, so be sure to take your time. This isn't a 5 minute install. Between installation and calibration, expect to take 30+ minutes. A few things I want to point out. 1.) The orientation of the light strip matters. The picture on the installation guide shows the led strip installed so that the power plug end is at the bottom right corner coming from the top right corner (when looking at the tv from behind, and at least on the 55"-65" version I have). Failure to install the led strip in the correct orientation shown in the drawing will result in the lights showing the colors in incorrect positions. 2.) Take your time with the calibration process. Do not think you have it wrong when setting the area of the screen, you can move forward and backward through the steps freely in the app on your phone during the process. 3.) You will likely need to adjust various settings in the app to get the light colors to closely match the colors on your screen. Most important settings for this are Saturation (turn way down)l usually) and White Balance (this will be dependent on your TV). 4.) There is an option for Part or All. Part makes the lights more reactive to color variations in the scene and All makes the colors match the scene as a whole more. There is also an option for Game or Movie. Game has faster, more abrupt lighting changes, while Movie has smoother, less rapid lighting transitions.

I recently picked up the upgraded Govee TV Backlight 3 (Or T3 Lite), and it has completely transformed my viewing and gaming experience. The new chip with fish-eye correction really shows. Colors around the edges match the screen far more accurately, making movies and games feel incredibly immersive. The lamp beads also deliver noticeably purer whites and more vibrant colours overall. About the setup: Setup was surprisingly easy. The light strip went on smoothly, and the new camera design is a smart touch, especially for thinner TVs. The only small challenge I had was aligning the camera’s view perfectly with the exact corners of my TV—if your room has a lot of glare, it can make calibration a bit tricky. That said, it’s absolutely doable, and once set, it works reliably. DreamView syncing is another huge win. Being able to link my other multiple Govee devices and create a full room lighting effect is incredibly fun and adds a whole new level of ambience. And best of all, it works with any TV content streaming apps, games, online videos with zero compatibility issues. Controlling everything through the Govee Home app (or Alexa/Google Assistant) is super convenient. I find myself using the black bar elimination feature the most. This helps reflect the true colour of the scene via the lighting strip, and not just emit a darker shade. This genuinely enhances the experience. Overall, this is an amazing upgrade. If you want a bright, responsive, and immersive lighting setup for your TV, this is absolutely worth it.

It’s nice so far and very easy to install

Acabo de probar este modelo para mi TV de 55-65 pulgadas y la verdad me gustó bastante. ✅ La instalación es muy sencilla; solo hay que pegar la tira LED y colocar los puntos naranjas para calibrar con la cámara fish-eye. ✅ Los colores se ven muy intensos y sin delay notable cuando cambian con la imagen de la pantalla. ✅ Tiene bastantes modos de iluminación y se controla fácil con la app Govee Home. ✅ La cámara no es tan estorbosa como pensé, aunque se ve un poco arriba de la pantalla. ❌ Lo único es que la calibración toma su tiempo y la cámara siempre estará visible (por si eres muy detallista con la estética de la pantalla). 💡 Conclusión: Si quieres un setup más inmersivo para gaming o películas, vale mucho la pena. La función de sincronización de colores funciona bien, y la tira RGBICW ofrece tonos más reales que otros modelos básicos de LED.

Amazing. Looks so good. Really makes TV or movie watching so much more immersive. I just got installed on New Year’s Eve watching the Canada game. Also have the Govee lamp 2 with dreamview. This is such a game changer. A couple tips, the 3m tape didn’t really stick that great, especially around the corners, so I used flex tape, I cut into trin stips which worked amazing. Check your calibration might take a couple times to get it right but once you get it works great. I immediately bought a 2nd govee lamp 2, so the dreamview lamp setup is balanced in the room. Can’t recommend enough, if you have been eyeing one of these up. DO IT, you won’t regret it. The 3 Lite works really great,I would highly recommend this combined with 2 Govee lamp 2’s. Amazing

Vale totalmente la pena está súper de buena calidad , solamente el pegamento de las luces se me hizo un poco sin pegamento pero pues eso es lo de menos , se mira súper bien y es muy fácil de conectar y todo 100% recomendadas 💗🫧