3d Pla Filaments 3d Printing Pen Filament Refills 1 75mm | Desertcart GERMANY
3D PLA Filaments, 3D Printing Pen Filament Refills 1.75mm ,PLA spool for 3D Printers & 3D Pens(30 color),Adkwse (5M*30 color)
1.0/5
Produkt-ID: 56333329
Sichere Transaktion
Häufig zusammen gekauft
Beschreibung
PLA filaments is a biodegradable thermoplastic which is derived from renewable resources, such as cornstarch, sugar cane, tapioca roots or even potato starch. This makes of PLA the most environmentally friendly solution in the domain of 3D printing.
The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp.It is normally extruded around 160°C-220°C Compared with traditional brittle PLA, Adkwse 3D printer filaments have adjusted the degradability of the material for optimal performance, so Adkwse PLA filaments are not brittle during 3D printing jobs.
100% ENVIRONMENTAL FRIENDLY: Adkwse 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic.
The 3D printer filaments are compatible with most commercially available non-cartridge based 3D printers. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the PLA 3D printing filaments.
If you are not using your PLA spool over a longer time, you should store it properly in an airtight container. PLA does attract moisture from the ambient air, which may affect your prints.
Choose Adkwse PLA 3D Printer Filaments to Achieve Amazing Results! The 3D printer filaments display less warping, and this is the reason why it is possible to print without a heated bed. The 3D printer filaments are made for 3D printers with degradable bio-plastic, and the printed objects will have a glossier look. The 3D printer filaments are compatible with most commercially available non-cartridge based 3D printers. Important Instructions for Adkwse PLA 3D Printer Filaments The print bed or print surface should be level. The extruder should be adjusted to the correct height from the bed. The printing temperature should be adjusted according to the 3d printer. The printing speed should be adjusted according to the ambient temperature. A good base material should be provided for PLA to adhere to. Be sure to insert the thread into the spool hole to avoid tangles. Keep the filaments in sealed bag until ready for use. Keep the filaments in dry place & Keep away from heat. Scientific designation ：Polylactic acid or polylactide The 3D printer filaments： Produced from：Plant starch Properties: Tough Strong Extruder temp:160 - 220°C Post-processing: Sanding possible Limited glueing Pros: Bioplastic - good environmental properties Good smell when heated Nontoxic No heated printbed necessary High print speed and resolution Less warping or shrinking issues Ideal for small parts Hard or soft/flexible variant
Häufige Fragen
TrustPilot
TrustScore 4.5 | 7.300+ Bewertungen
Ali H.
Schneller Versand und hervorragende Verpackung. Das Leatherman-Tool fühlt sich sehr wertig und stabil an.
vor 1 Tag
Al-Kaida H.
Insgesamt eine fantastische Erfahrung. Werde es Freunden und Familie empfehlen.
