Electric Random Orbital Sander Brushless 350W 3A Multi-function Variable Speed Corded Orbital Sanders Machine For Woodworking, Car, Drywall Sanding, Polishing…

We have a professional body shop. We’ve always used air sanders, My air compressor was having issues and I happened to see these. So what a better time to test them, I bought 2. Over all they’re way smoother than air, at the highest speed, next to an air DA orbital sander. It was maybe about 80% as good as an air sander. They’re definitely quieter. Definitely worth buying. Only complaint maybe would be the lever to engage, you have to apply a little of pressure. But nothing serious. Over all better happy, hopefully they last long.

I have about 6 hours on this sander it is going very well so far. I have used it to sand the sides of a large boat with 80 grit mesh and then go over that with Scotch Brite using this sander. I was using an extra velcro pad. I did the same earlier with the Mirka and so very comparable workload. All work was done on a ladder and with a vacuum attached so ease of turning on/off, moving the ladder, and dealing with the vacuum are part of my experience with this sander.This sander is slightly larger than the Mirka. The controls are the same (on/off switch, LEDs for speed, variable push paddle). The pad is the same. The cord is super long, thank you. The cord does not detach and so I suppose that is a negative. The feel is not as perfect in the hand as the Mirka but for 1/3 the price it is close enough for me. The vibration is the same and I did not feel nerve fatigue with either sander after many hours of sanding.The dust collection hose is attached pretty permanently to the sander, I like this better than the Mirka since it doesn't come loose. I duct taped the far end of the hose to my vacuum and that was a solid connection which even allowed me to hang the sander off a rung of a ladder while I moved the ladder. I would say I like the vacuum arrangement on this sander better, it is more solid. The O.D. of the hose connector is 1.5".I do two kinds of sanding: flattening and edge grinding. For flattening it is as expected and with the mesh sandpaper does a great job with no dust. When I push the edge into the material it behaves very similar to the Mirka, it slows down rotation or stops and just vibrates. I would rather it keep turning but the Mirka does this same thing and so it is hard to criticize.I will update this review once I have more hours on the sander. So far I am very happy and would buy it again. I work in a boat shop and Mirkas fail sometimes here, it will be interesting to see how long this sander lasts.Update (2023-08-14) after 6 months of use:I love this sander. It is now my go-to sander. I don't know how many hours I have on it but I am on my third velcro pad and a couple hundred sanding disks. The dust collection is very good and easy to connect/disconnect from various vacuums. I like the feel in my hand and I do not get fatigued or nerve damage from it. I have also been using it with Scotch Brite pads and that works well too; the sander has enough power to scuff metal and keep going with quite a bit of pressure. I would definitely buy this sander again and am glad I took the risk.Update 2024-01-25: Still in love with this sander. It is my goto tool. Recently I put 40 grit on it and smoothed structural foam. The dust collection kept the mesh clear and I was able to cut/shape for well over an hour no problem. I also used 320 grit holding it very steady to rough up varnish. I really like this sander, it feels good in the hand, does not cause fatigue, and it is easy to switch meshes (turn it off, flip it upside down, back on again). If this sander ever fails I would buy another in a minute. I have been using Mirka 6" hook and loop pads on it, I have not found a cheaper source.

This is the best sander I've ever owned! Comfortable, efficient and it WORKS!!! You will enjoy it!

I have three different Dewalt sanders, every single one vibrate my hands to the point that it gets numb. I wanted a good sander with low vibration at a reasonable price. I decided to give this sander a try since one of the reviewer state it has low vibration. And yes it does have a low vibration when sanding. I love almost everything about this sander but one thing. The dust port hose is an odd size. None of my hoses will fit the end of the already attached short hose. I was able to squeeze a Rockler dust hose rubber port into the sander hose and make it work. To my surprise the Rockler small diameter port did not restrict the air suction. Not a bad sander. I would buy this again.

I purchased this sander 5 months ago, but have only recently needed to use it. It worked great for a couple of hours, but then quit completely (will not turn on at all, despite trying multiple trouble free outlets on different circuits). It is/was connected to an effective dust control system. Nonetheless Amazon's website shows this sander as having a 1 year warranty, but provides no contact information for Phendo, the manufacturer. Because there is no reasonable way to obtain support or contact information for Phendo, I WOULD NOT purchase this product.

This sander produces an exceptionally smooth finish with no swirl marks. It is comfortable to hold and use and has very little vibration. I set it up with an automatic switch so my vacuum is turned on whenever I start the sander. The dust extraction is very efficient and captures almost all of the dust making the use of a dust mask unnecessary. The unit seems well-built. Since it was just received I cannot review how long it will last, but the motor does not show signs of overheating. A definite recommendation.***Update 1/8/2024 -It's now been a few months shy of a year since I purchased this sander, which has been used almost daily to do medium and finish sanding on sign blanks prior to staining or painting. The machine has held up well and replaced a Dewalt 5 inch sander. The 6 inch diameter abrasive covers more area and produces a good finish when combined with premium abrasive. When combined with dust extraction it eliminates the need to wear masks. It's very low vibration makes even long duration jobs more enjoyable.Highly recommend.

It worked fine, was able to sand complete body panels on a couple of cars, then it just slowed down, and barely works now. Would not recommend for anything other then very light work. Would not recommend for any autobody work.