17014 Premium Original Equipment Oxygen Sensor - Compatible with Select Rolls-Royce Phantom

This is the correct O2 sensor to replace the one on my fitech fuel injection system which makes it correct for the jeggs throttle body as well and it was less than half price of the fitech or jeggs part no problems at all in 3 months of daily driving

This was the cheapest I could find the sensor for so it was a no brainier. The seller got it to my mailbox in literally 24 hrs. So good job. So the Bosch o2 sensor that came with my MTX-L was probably too close to my turbo. If u read this review before you install, follow the guidelines offered by the various WBo2 mfg's and put it down stream of ur turbo at least 2 feet. I dont see much difference in my narrow band vs the wideband when it comes to response. since the narrow band is right next to the turbo(factory placement) and this sensor is now 3' away, no perceived delay (reviewing logs). I can't comment on longevity of the sensor when its far from the turbo because its only been there for about a month. Sitting next to the turbo, my first sensor lasted about 6mo. Anyways, this was plug and play. After calibrating it, I installed it in the pipe and sured up all the wires. Done. Works like a charm.

Perfect

Oxygen sensor works great with my wideband gauge and megasquirt E.C.U. The only reason I am not giving it 5 stars is longevity. The sensors seem to last only 4-5 race weekends, then fails and needs replaced. Fortunately they are relatively inexpensive. Be sure to use 100 octane or above fuel if using it in race applications.

Perfect fit on my 2001 VW Jetta VR-6. Bosch was also kind enough to pre-apply a small amount of anti-seize to the threads pro tip : both O2 sensors are located on cat converter midway under the car. remove the cat converter to replace. Very easy just .. remove/loosen 3 - 13mm bolts and 2 - 17mm nuts and whole unit drops out. DO NOT ALLOW THE TIP OF THE O2 SENSOR TO GET ANYTHING ON IT, NOT EVEN FINGERS, this will cause premature wear, faulty readings or even failure. bonus repair : replace downstream O2 while cat converter is out you will need: jack 2 stands 22mm wrench 17mm socket qty 2 - 13mm socket or wrenches 10mm socket/wrench spray lube

Work great. 2min install and my car is running like a champ.

product went back after 200 miles. Tried to claim a warranty replacement, as it's well within 12 months. Amazon referred to to the seller because it wasn't purchased from amazon directly. Seller referred me to the manufacture because it was purchased 3rd party. Manufacture referred me to go to Amazon as they were the 3rd party seller. Amazon took my complaint and sent it back to the seller. The seller again told me to ship the defective product to the manufacture with no RMA, ticket, claim # or warranty ticket. manufacture again emailed me that they do not accept 3rd party purchases as they cannot guarantee authenticity. if you need an O2 sensor, just buy it from a car parts store like Autozone, NAPA, etc.

I bought this to replace the failed sensors on the Thundermax on my 2010 Harley Road King. It's an identical match to the original supplied by Zippers at half the price. I installed them and they work perfect. Note that Bosch recommends replacing these every 30,000 to 50,000 miles in auto applications -- mine had 32,000 miles on it when it failed. Also note that you can get these for $50 versus $60 if you buy directly through Amazon. Although it says 6-8 week delivery, it takes about 3 days -- don't know why they have the misleading delivery listed for Amazon, LLC.

Worked perfect! Fixed my part throttle surging issues I was having. OEM part.

Perfect fitment. No issues installi g works perfectky bought it for my innovative motorsport WIDE BAND gauge

使い始めてすぐに反応しなくなりました

I installed this on my car 1 years ago and the car accepted it as one of its own without complaining. I knew it was a perfect match.

Bought this to replace the wideband sensor for my innovate mtx-l that I have installed in my car. Genuine Bosch part and came in box. Is the exact same LSU 4.2 sensor, length of cord (2 feet) and connection as the one that came with the innovate wideband originally. Works as intended and delivery was silly quick.