sourcing map Tank Stainless Steel Liquid Floating Switch Water Level Sensor

sourcing map Tank Stainless Steel Liquid Floating Switch Water Level Sensor

Q: Is the temperature rating celsius? Can this be used in 170f degree water?

it can be used under 85 degree celsius

Q: How many amps at 12 vdc?

This is a switch, so it is either on or off as a short circuit and should draw no amps on its own. It is rated at 10W. Using the formula P=I*V, your maximum amps would be I = P/V = 10watts/12volts = 0.833amps.

Q: Is the switch open when up and closed when down?

It is either because you can remove the clip under the float and invert the float. The rod contains a magnetic switch that is "on" until the magnet approaches. The float has a magnet on one end. So it depends on the orientation of the float. You can use a volt-ohm meter to test the switch orientation/operation. Most importantly, the switch is only good for 1/2 of an ampere which is not much. However, I really like these switches as I use them to control the level in our coffee machines so I don't have to fill them. The switches are perfect for operating solenoid valves for filling an aquarium. However if you use them for turning on a pump in a sump you must use a solenoid switch capable of passing the amperage required.

Q: Can it be interfaced with arduino?

Yes. I have used it with an Arduino and a Raspberry Pi. Simply use a pull up resistor from the +V (5V Arduino or 3.3V RPi) and use the switch to pull the input low (tie one wire to the input pin with the pull up resistor and the other wire to ground).

4.3/5

Produkt-ID: 435285484

Sichere Transaktion

Details

Operation mode
automatic
Current rating
0.5 Amps
Operating voltage
220 Volts
Contact type
Normally Open
Connector type
Screw In

⚡10W Max Power

🔌100V DC Voltage

🌡️-10 to +85°C Temp Range

Häufig zusammen gekauft

uxcell Stainless Steel Float Switch for Water Pump Tank Swim Pool Garden Pond Liquid Water Level Sensor M11 240mm Length

uxcell Stainless Steel Float Switch for Water Pump Tank Swimming Pool Garden Pond Liquid Water Level Sensor M10 116mm Length

Electromagnetic Power Relay, 8-Pin 10 AMP 110V/120V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ [Applicable for DIN Rail System]

Beschreibung

💧 Elevate Your Water Management Game!

COMPACT SIZE - Easily integrates into tight spaces with a sleek profile.
DURABLE DESIGN - Crafted from stainless steel for longevity and reliability.
PRECISION MONITORING - Stay ahead with accurate water level detection.
VERSATILE APPLICATION - Perfect for various water management systems.
USER FRIENDLY INSTALLATION - Quick setup with included mounting hardware.

The sourcing map Tank Stainless Steel Liquid Floating Switch Water Level Sensor is a robust and reliable solution for monitoring water levels. With a maximum contact rating of 10W and a temperature range of -10 to +85 degrees Celsius, this sensor is designed for durability and precision. Its stainless steel construction ensures longevity, making it ideal for various applications in water management systems.