Galaxy S20 FE Battery, [Upgraded] UNKLOU 5200mAh Li-Polymer Replacement Battery for Samsung Galaxy S20 FE 5G SM-G781B G781U G781W SM-A526 A526B/DS A5260 A526W with Repair Replacement Tool Kit

Followed the video in youtube to install the battery. It would be great if a small glue paste can be added to the package. Initially I had missed hooking the display connector and was worried on the functionality but It was straight forward correction and It worked perfect. Battery life is about 30 hrs or less. Good product and accessories provided helped install the battery with ease. Would recommend this product.

My Moto G6 has been powered with the new battery for six days, and it's holding up thus far. Bought it, along with a Newderry charger case for extra battery life. I researched, and took notes from several YouTube videos before tackling the replacement process. The parts are small... you have to be careful with the screws and battery connector. Most importantly, don't tear the battery shell! I slowly removed the bloated battery from my phone. I didn't need to use any extra adhesive, as I was installing the phone into a new case. A bit of heat from the phone will take care of the adhesive, so everything should stick back solidly. (I was considering buying extra adhesive, but I felt I didn't need any... if that changes I know what to do. :) ) Along with the case, hope to have this for at least a couple of years!

I installed this in my phone and rather battery reset did the normal battery cycling to get the most out of the battery and then checked the stats of the battery and my phone stated the battery was only a 4300mA battery not a 5000mA as stated on the product if I could it would get no stars and I'm not paying to have this one pulled from my phone and turn around and pay again to have a new one installed phone is too old to keep adding money to it

The instructions say watch a video of battery replacement, but there is several different videos, maybe there is different models of the G6, the one I chose had you remove a cover with many screws to remove battery leads, there is covers over both ends, the cover it showed was the wrong end for my G6, the video said it was about a ten minute job to replace the battery, took me about 1 1/2 hrs, the hard part was removing the old battery from the adhesive I used alcohol it was still very tuff. So far new battery has been good but it has only been a few days.

Thankfully, when the original battery swelled it popped off the back cover so I didn't have to go through that process when replacing the battery (which typically results in the glass back cracking). I also didn't have to remove the mainboard to replace the battery like the YouTube instructions say to do. Everything reassembled perfectly and working good as new. When battery swelled, I talked my son into making the big jump and switching from an Android phone to an iPhone 12, but I'm keeping this phone (which is now in perfect condition) as backup phone for my Moto G Stylus 2020.

There was no manual or installation guide included, although the description said there would be.

The hardest step to installing this battery is removing the glued back. Follow the YouTube videos. I used a heat gun on low heat. A hair dryer on high would also work. I put the phone face-down on a kitchen hot pad and used a 2nd pad to hold the phone. I heated only a third of the bottom starting near one corner. I used a triangular blade Xacto knife to gently cut the heated glue. Once I got the point (only the pointed tip) of the blade under the cover I continued heating toward the corner until I could slowly drag the knife tip into that corner. Then I pried the back enough to insert the plastic cutting tool. I removed the knife and heated the remainder of the bottom; inserted the 2nd cutting tool and dragged it into the other bottom corner. From there it was heat - cut in steps. Once the back cover is free the rest is easy; follow the videos. I'm currently conditioning the battery (drain to 0; charge to 100; repeat). I added 2 steps prior the reassembling: clean the camera lenses and flash as well as the lens protector inside the cover; use DustOff or pure air to blow out the phone and cover. I did NOT remove the residue glue and found that it resealed the cover. A little heat would likely have helped but I use a case which keeps the cover tight.

I liked this kit a lot, it saved my phone, Just be very careful when replacing everything back together, to make sure phone will work properly. you can do it in front of a Youtube video, to make sure your doing everything correctly. I cleaned all the old glue off the cover and the phone back with contact cleaner, this was harder then replacing the battery. You could also buy a small tube of contact cement instead of using the glue strips that come with the kit. This would make it easier to glue the back cover back on. (Note: make sure all the buttons on the side of the phone work properly before glueing the back cover back on).