Mouse Charging Dock Compatible with Razer Gaming Mouse Viper Ultimate Naga pro DeathAdder V2 Pro and Basilisk Ultimate Magnetic Charging RGB Lights Status Indicator Gecko Feet (RGB)

What an awesome charger stand. It's just simple and that's all you need sometimes. There are a couple things that I like about it and a couple things I don't like about it but I also give it a five star because it does its job, and it was a great price overall.Pros -1) The price. $14.99 is so much easier than $49.99. Sometimes it is great to get the name brand because you get certain features that you might not get in a cheaper version. That's not necessarily the case here and for the price difference of $35, I chose this one.2) The Aesthetics. This item is pretty simple, one chord one device two prongs and an LED light. The light turns red when it's charging, the light turns green when it's finished.Cons -1) I honestly would not mind if there was some kind of switch on this to choose the color when it is in standby mode because I'm not particularly fond of the rainbow LED colors.2)The rubber on the bottom works well, but it still slides around, so just keep the feet clean and it won't slide, and it definitely sticks better on a glass desk.Overall, I am pleased and would recommend. The Razor brand has really good rubber feet and stays green and does not rotate colors of the rainbow. I think that this is my only real complaint, but I understand they can't copy that brand too much, so if there was a button that switches between the colors then that would be awesome.

Just work as expected. Charges my mouse and I use it almost Every day.

Does what it says, it charges my DeathAdder v2 Pro. This was too bright on my desktop and since it's always on was bothering me a bit. The following is what I did to make it dimmer and is 100% removable. There are 4 screws on the bottom of the dock that need to be removed to open it up, but don't remove the entire grip pad, just carefully lift each corner to reveal the screws and remove each one. The top and bottom of the dock can then be separated but do so carefully as there is a ribbon cable attached in between the two. At this point you can see the LEDs. There are two of them that look like clear rectangles and can be found on the top half of the dock. If you're not too sure just plug in the USB and then you'll see. To make them dimmer simply use a piece of masking tape and cover both LEDs completely. Afterwards, take a black marker and color in the tape over where the LEDs are and depending on how dim you want you can add another piece of tape and color it as well. To test just put the two halves of the dock together without the screws, plug in the USB cable and take a look. When satisfied put the screws back in and you're done. If you didn't remove the entire grip pad and only the corners it should stick back to the base without an issue and the whole thing is removable if you change your mind afterwards.

Work just like the real one and the price is way cheaper.

Does what it says, it has a USB pass-through so you can connect the 2.4 dongle that comes with your Wireless Razor mouse. Synapse can detect your Razer mouse through the pass-through too! This pass-through is very snug and I needed pliers to get the dongle out.Obviously this will not work with the Synapse software and the hardware is not addressable by any other 3rd party software. Small quirk, the dock glows red when your Mouse is docked and otherwise cycles colors. The only way I can get it to stay green is if I unplug and plug the dock back in. It would've been nice to have a few preset colors to cycle through but that would likely add some cost. Ideally the dock could read the battery level of the connected mouse and change colors that way but I think Razer reserves that feature for 1st party.For $20 I can't really complain. It holds the mouse and charges it would needing to constantly plug in the USB

It works as designated. Simple accessory

Timely delivery of this new product in its original box at a good price.

When I got this I was very disappointed, it will hold on to the mouse if you baby it and guide it on there pretty much pick up the mouse and pick up the stand and make them connect in the right place, but that defeats the point of a doc.I wasn't going to send it back and I was curious if there was a magnet in there that was somehow placed wrong or something so I took it apart.First of all, there are four Phillips head screws I removed from under the rubber mat on the bottom of the unit, these Phillips screws were already stripped when I found them my guess is that they really cheaped out on manufactureing and are you using a electric screwdriver where they shouldn't be in order to save timeLooking on the inside there's a cavity that's clearly designed to take a rectangular rare Earth magnet in my image it's outlined in red, but they suck a much smaller magnet in there less than half the size of what this is designed for and filled up the rest with hot glue!!!!This is despicable, they probably saved 20 or 30 cents per unit and instead of a product I have E-Waste here sitting on my desk.I'll update if I can find a rare earth magnet that's not too expensive that will fit in here.