VDV826-704 Modular Data Plug for CAT6A and Larger Diameter CAT6 Indoor or Outdoor Ethernet Cable, 50 Pack

These data plugs work as expected! They are exactly what I needed and provide a high quality signal.

Bought these because the TrueCABLE connectors I purchased previously were too small for the conductors to fit through. 1.) This fits perfectly for UniFi CAT6A CMP cable. 2.) I used a trueCABLE crimping/stripping tool which worked fine. 3.) I did not use a handheld tester, but hooked it up to my backup router and worked fine. I will be getting a tester for the remaining drops. Hope this helps prevent people from buying the wrong item the first time like I did. Thanks.

work great do NOT buy the ideal version... Klein is much better. 8 holes to keep the wires in place to crimp

They work and test good on my Flukes, but are WAY overpriced for what they are, minus one star. Purchased for terminating around 65 Cat6A cables and these pass-thru ends definately saved a lot of time and confirmed pairs before crimping.

I have made 10s of thousands of patch cables over the last 30 years managing large data centers, and these are the second most frustrating ends I have ever needed to use. I already hate pass-through connectors, but these step it up a notch because there is no alignment shim to hold all the wires in place before you put them in the end connector, and so your only option is to leave about 4 inches of extra wire once it is stripped back, and then feed each individual wire into the connector one at a time. Also, the connector is so cheap, that if you pull your wires through the front with any force, they pull apart the separators between each wire channel, and then you have to pull off the end connector and start over with a new one. I terminate non-passthrough connectors in about 60 seconds, but each of these takes me about 8 minutes to complete, assuming none of the individual wires breaks through their slot and I have to start over. Also, if you don't buy their custom crimp tool, make sure you have a great pair of flush cuts or you won't be able to plug the cable in when you are done. There is no tolerance for wire headspace on these.

Everything Klein Tools produces just absolutely works flawlessly. I am done buying cheap tools. This was great to help me install CAT6a cable and the side of the tool has the Color Code so super easy to remember.

Was able to use these with outdoor Ethernet cable and had no trouble fitting the sheath into the connectors. I used a Klein crimping tool with them and both worked well together.

I have put on a lot of connectors and I will say these were by far the hardest one I have ever had to put on.