BESTSUN Remote Pressure Switch for WF-501B LED Torch Hunting Flashlight

I want to give HIGH marks to HiMart on their customer service. I originally had written a bad review because the remote pressure switch sent was for a different model flashlight. I received an e-mail from HiMart within ten minutes of leaving the review. They asked what was wrong and that they would make it right. AND THEY DID!!!! The product is exactly as advertised. I RECOMMEND this product from HiMart. I would have normally given a 4 star mark, but their exceptional customer service from HiMart puts it at FIVE. If you see a product being sold by HiMart, you should have the confidence that you will get what they list on Amazon or they will make sure you do!

I purchased two of these switches and two Ultrafire cree 501b flashlights. Well these switches do not fit the Ultrafire 501B series flashlights, they are a larger diameter then the 501B body, however they do fit the CREE XML T6 1800 and 1600 series flashlights. These lights can use the 3aaa battery holder/pack and have male threads on the battery body meaning the diameter of the flashlight body is the correct size for these switches. I happen to have just purchased a CREE XM-L T6 1800 lumen light and this switch fit.The construction seems OK but the threads do not seems to be as tight as they should be so do not overtighten on flashlight!!! The switch works well and must be held down for the flashlight to work meaning it is a normally open switch. a great deal for a microswitch but be sure to purchase the correct light for a correct fit.

the switch is of good quality and easy to use, has a big sweet spot unlike some that ya gotta search for the contact in it. One thing is the light, it would work better if the light I bought was just an on and off and not several diff settings, high,low strobe sos. each time you push the switch the light goes to another setting so you have to have it set up for what setting you want to come on when you push the pressure switch. not a big deal, the light I got with t and the switch work great, I would buy 5 more , I use this on my AR15 for entry.I feel this will hold up well. A+

Just what I needed for tactical rail mounted T6 Cree flashlight.Smooth threads, good construction (spiraled wire back through the coil to shorten it and then I put the other end through the loop at the far end of the loop I had made, no failure manipulating the wire this way.The ONLY MINOR negative is the Black Finish is SHINNY ! For tactical use we do not want reflections !(Positive aspect of the shinny finish is it IS at the BACK of the light and not visible by anyone in front of you).I would buy this again and again, but I only need this one ;-)I recommend this item unless you do tactical SWAT for a living (you probably wouldn't be buying inexpensive stuff if your life were at risk, daily, anyway).

I put this on my light that is the IR version for a NV scope and it works like a champ. It also worked well on the regular version of the light as well .The only thing is with the regular light that has multiple modes 3 or 5 , it goes to the next mode on the light with every press of the pad . The IR version only has one mode so its perfect for that and the reason i bought it .

I have bought both tail caps and both lights none of these tail caps fit the lights. By the lights they are great but don't count on ever getting the right tail cap......I'm not the only one this has happened to. They would be to expensive to send back. That's where they have you cost you more to send it back then it is worth.Update: The company has realized they have a problem....They say they are going to provide a refund. I have made a number of suggestions to them to get this fixed. I am upgrading by one star since they are working with me. Dave

These are not worth the price, even as low as it is. They flicker on and off, and, they DO NOT transfer a full charge from the battery to the light. The two I bought only run at about 45-50%. In other words, my flashlights do not shine nearly as bright as they do with the regular switch, that is, when these remote switches work at all.There is certainly a demand for these products. China needs to step up to the plate and deliver a remote switch that works as it should. It's not like they can't do it. They are certainly capable of delivering quality product.As popular as the awesome Ultrafire lights are, a PROPERLY WORKING remote switch is NEEDED, since these lights make great weapon's mounted lights. My Ultrafire flashlights stand up to 12 gauge magnum loads on a regular basis. They handle those loads with aplomb, with not even so much as a flicker.WE NEED A REMOTE SWITCH THAT CAN DO THE JOB RIGHT! Ball's in your court, China.

I would have to say that if there were anything that I would change about this switch, it might be a little different spacing of the pigtail section of the wire. Other than that , it works perfectly, the placement of the pigtail section does make it a bit challenging to fit to an AR quad rail, but not impossible by any means, just use some real small zip ties to hold the wiring down to the rail, and your good.