DaierTek Latching Push Button Switch 12V Pushbutton Switch Blue LED 12 Volt Push Button Switch Metal Waterproof ON Off Switch 16mm with Label -5Pack

Easy install, great instructions, well built, bright blue light, works fantastic, seems durable, love the wiring harness that you can unplug. Highly recommend it.

Easy instalation love them just read the instructions for what wires you need

These worked perfect for a little power supply build. Just the right size and plenty beefy enough. For those who keep giving bad reviews about the led light burning out or running it on 5 or 12 or other direct supply voltages, you need to read up on how to power led’s. LEDs of that size usually burn no more than 3.5v’s and draw about 15 mA’s. Always, always use a current limiting resistor in line with an led. My power supply as you can see will supply 14.25 volts dc. Subtract 3.5 from 14.25 and you get 10.75 volts. Divide that by the amount of current you want to burn your led at and there’s your resistor size (or the next size closest to that number.) You can put the resistor in-line with either the positive or negative lead by the way, doesn’t matter. Without this resistor the led will just burn away at the maximum current it can draw out of your supply and die a miserable death in quick order. So for example: 10.75/.015=716.6…I’m running a 680 ohm and it’ll last for years. So, divide the voltage your supply is giving minus the 3.5 volts by .015 or .020…most people burn led’s in the 15-20 mA range…and your light will be happy for a very long time. I think the supplier here assumed most people would know this so it’s not included in the description anywhere but…there ya go. Good latching switch though, feels good when operated and looks good too. Glad I got ‘em.

I used these in a custom shop made cluster and one of the switches didn't work. I really only needed 4 but it would be nice to have a spare. It's all installed and would be too much work to tear it down and do a return.

Have used these a bunch, so far good quality.

LED works with 5V and 12V, havent tested any other voltages, but that's what my power supply has. A rudimentary wiring diagram is included. But what you can do for the button is set your mulit meter to beep mode (continuity actually , it has a symbol that may look like wifi) When the probes make contact to each other you get a beep. now hunt around on the contact for two pins that beep when button is unpressed, and then push the button in, and hunt around again for two pins that beep. You will see that one pin is involved in both cases. You dont NEED to use the LED for this button to work, its only decorative and the LED works independantly of the button being up or down. Also, you dont need to use all three pins on the button, just the 2 that you want, either button up or button down.

I have one that likes to stick other then that love them

I really appreciate the size and the functionality of these buttons. The buttons are very satisfying when you press them. Easy install and plug works very well, easy to connect unlike the ones that don’t have a plug. Worth it!