Kywoo Tycoon Max 3D Printer, Large Print Size 300 x 300 x 230mm, DIY 3D Printer FDM Metal 3D Printers Kit with Wifi + Auto-leveling Function, Upgraded Silent Motherboard

The media could not be loaded. The auto bed leveling makes this printer super easy to use, the kit comes with everything you need to start printing your own project.There is total of 4 screw to put the base and the main body together, 4 wires need to be connected by push fit slots. The overall design of the printer is really stable, there is no movement at all when fixed, this will be the ideal condition for 3D printing.The auto bed level function remove one of the biggest hurdle for any novice user, it comes with the black glass which again very easy to use with zero bed adhesive issue. Just let the glass cool down and the print magically pop off the glass.It is a shame that the most common 3D slicing software do not have the Kywoo printer profile, luckly you can just create a custom printer profile to match the Kywoo : 300x300x230 200c/60c and the filament size is 1.75mmThe extruder use metal gear and a big tunable adjustment knob on the extruder, the usual filament run out sensor, load and unload function are all available. The stepper motors are all very quiet the main source of noise is from the PSU behind the yellow cover. The bed takes around 5 minutes for the bed to reach 200c and the nozzle to reach 60c from 20c,small wheel of white PLA is included which quality is fair, I will not hesitate to recommend this model to anyone who never use or built a 3D printer before.

Very easy to set up and use. You can be printing good quality prints in 20 minutes. get it level then off you go. There lots of help in the Facebook group/YouTube videos. If you still have an issue the customer support team is very helpful and quick to reply and solve any problem & answer questions . There is lots of upgrades at the kywoo site so you know they will work. With quick delivery.

Don't bother reading on, just click buy!Easy to set up, easy to use, really good results straight out of box (after a little assembly).If you watch a couple of blokes on Youtube saying it's awkward to assemble just ignore them and watch the one with the young girl reviewing it. She shows how easy it is.If I had the use for a second printer I'd get another of these without thinking.

Literally worked out the box great prints easy to use not got the wifi to work yet so I just use micro sd cards use a quality glue stick on the base and wash off when done

As an absolute beginner, I've found it super easy to set up, as well as, find additional information on settings (for Cura) from the Kywoo website or Youtube.So far I've tried TPU, PLA and Wood filaments with great success.I mainly got the printer to make replacement quadcopter parts and am very pleased with my experience so far, perfect for my requirements.

I decided to get a printer with a larger build plate and I wasn’t disappointed with the Kywoo Tycoon Max. Easy to assemble and set up with self levelling system. I was doing the test prints within 30 minutes. I couldn’t believe the quality of the test prints.I’m looking forward to doing some serious printing.This is an addition to my review.This printer is living up to all my expectations. I have no print failures and every print has been perfect.My only bit of advice I would give to anyone new to the hobby is make sure you clean the build plate thoroughly with isopropyl alcohol after each print.A second update on this printer. I had a problem as the cable leading to the hot bed broke so I contacted Kywoo who apologised and sent me two replacement cables. I replaced the cable and I was up and running again. Since then two different faults have occurred both of which I wasn’t comfortable about repairing myself. After being repaired by a professional 3D Printer repairer twice, at extreme cost to myself it has developed a fault again !This isn’t my only printer, I have four other printers which happily print away for days on end.Think carefully if you’re going to purchase this printer.

Not a good response from supplier and will not work with any programs not even the one it came with

First off the bat, click buy. for a beginner printer for rapid prototyping this thing is incredible for the price. Reliably prints great quality items with a variety of filaments out of the box.However, the pre supplied slicer is absolute trash. Download Prusa and thank me later!The prints can occasionally struggle to adhere to the bed, so I would recommend a thin layer of UHU just to help it along.Tycoon doesn't do especially well with overhangs, so make sure to add supports to your projects for pretty much ANY overhang!