EFAITHFIX for iPhone 11 LCD Screen Replacement Black (6.1'')

With free delivery, the new screen was shipped within 2 days. Following iFixit's video guide, I installed the new screen in just under an hour and a half. This is an amazing product, and the cheapest reputable 11 screen i could find on the market. Just be careful with the tiny screws and screwdrivers, as they will strip easily if you go to town. Take your time. After I reseated the battery, I had to plug in the phone for it to turn on, even though it was fully charged. If the screen isn't responding correctly, i recommend reseating the 3 cables for the screen and trying it again. last case scenario, I'm sure you could get a replacement for free if it's a dud screen. my favorite thing is the included magnetic screw organizer. It helps out a lot. The only problem that i had was adding the included waterproof seal, but it may be the fact that there was too much dust, and the seal couldn't adhere properly. otherwise 5/5!

works great

I normally do not like to write poor reviews on the product as I do understand being Amazon seller is tough. However, recent purchases of this product caused significant frustration that I should inform the seller and the buyers to be aware. Now where to start.. okay here it goes. Used to be great as I have purchased multiple times in the past and fixed screens for iPhones 11pro. However, as of Dec. 2023 the quality of this screen replacement has significantly diminished. In the past - Touch screen responded without issues, no dead pixels. Touch sensitivity had quick respond and able to use it without issues. The package also came professionally with all needed tools to replace and with screen protectors. Also it NEVER had screen freezes before. As of Dec 2023, this is where it begins with poor quality control which makes this screen replacement useless. Known Issues: CONSTANTLY FREEZES randomly during phone usage. Have to click power on/off on the side button to make the screen respond to touch. Very frustrating when it occurs more than three times, especially when your searching or streaming. Touch sensitivity is out of control. It randomly clicks other places on the screen causing text to miss spell frequently, minimize/maximize web browsers randomly, and clicks random things on my phone. Then freezes.. and have to turn on/off power button.. totally nightmares.Moreover, when phone is not in used, I see that the phone screen blinks itself multiple times which is very concerning. Therefore, thought that the one I received is defect and had replacement. Came DOA, had to reordered another one. This time, everything worked well except SCREEN FREEZES multiple times and continue to blink randomly when not in used. And the tools that came with this product was useless as it had no magnetic on the screw drivers. Well it didn't matter since I had multiple tools to repair. But, seeing so many poor quality control raised awareness that this product is no longer great as before. I will be no longer purchasing the screen replacement from this brand. Too frustrating and time wasting to reorder all over again to deal with constant same hectic issues. Unless they improve the quality issues, recommend looking for another brand. This is a honest review from who purchased this brand more than once and fixed phones well.

I loved that this came with everything to install and it’s a perfect fit

Every thing you need High quality screen Very low price Easy to do, but educate and take time very fragile delicate parts and very small crews. Adequate clean work space is necessarry. Fixes replaces very badly broken xr iphone screens perfectly. Note: apple id, password, and passcodes, you set to your phone are NOT hackable. Always keep it safe and secure. if you forget and dont have this info, dont bother fixing. You will need a new iphone

First thing, I like the packaging and how it has the magnetic pad for the screws. thats a nice edition. The tools were decent except the star one (used to remove screws on outside of phone) was very soft and basically rounded out trying to remove those 2. This is common on most cheaper screw drivers of this style. I replaced a lot of screens on older iphones but stopped after the 10, but luckly I still had my tools and was able to use that to open the outside. was a relatively easy repair and being my first time I had the phone back together in less than 20 mins and that was taking my time. first impression. phone screen looks very blue. im a photographer so I am sensitive to colors like that. Sat it next to an OEM screen and can defintely tell the difference. is it a deal breaker? probably not. so I closed up the phone and went about my day. an hour or so I went to check my phone and I couldnt swipe to unlock. no matter what I did, it wouldnt unlock. had to restart the phone by doing a hard reset and it worked. happened again after a while. another hard reset and it worked. been about 30 mins now and it seems to be fine, so im just going to chalk it up to a one time thing, but something to keep in mind. Also keep in mind since the screen isnt geniune you will get the error when you start up the phone. also screen doesnt have as good of viewing angle. before where I could lay the phone down and glance at it, the image would look good, here it is really bad. think about older projection tvs. im going to give it a few days to see if I want to deal with it or just switch to an oem screen. cliffnotes: its okay if you just want to fix your phone and dont mind little quirks...far from an oem replacement tho. edit: they did reach out to offer a replacement but I don’t want to repair the phone again. good customer service id say. maybe I just got a faulty unit.

Some one else mentioned it below so to save typing i will use their comment. Product works but is not like oem parts. You will need to restart after every time the digitizer stops working. "First thing, I like the packaging and how it has the magnetic pad for the screws! thats a nice edition. The tools were decent except the star one (used to remove screws on outside of phone) was very soft and basically rounded out trying to remove those 2. This is common on most cheaper screw drivers of this style. I replaced a lot of screens on older iphones but stopped after the 10, but luckly I still had my tools and was able to use that to open the outside. was a relatively easy repair and being my first time I had the phone back together in less than 20 mins and that was taking my time. first impression. phone screen looks very blue. im a photographer so I am sensitive to colors like that. Sat it next to an OEM screen and can defintely tell the difference. is it a deal breaker? probably not. so I closed up the phone and went about my day. an hour or so I went to check my phone and I couldnt swipe to unlock. no matter what I did, it wouldnt unlock. had to restart the phone by doing a hard reset and it worked. happened again after a while. another hard reset and it worked. been about 30 mins now and it seems to be fine, so im just going to chalk it up to a one time thing, but something to keep in mind. Also keep in mind since the screen isnt geniune you will get the error when you start up the phone. also screen doesnt have as good of viewing angle. before where I could lay the phone down and glance at it, the image would look good, here it is really bad. think about older projection tvs. im going to give it a few days to see if I want to deal with it or just switch to an oem screen. cliffnotes: its okay if you just want to fix your phone and dont mind little quirks...far from an oem replacement tho. edit: they also gave me a replacement part had i read this comment first i wouldnt have needed it. Constant hard resets isnt a deal breaker for me its an old phone now. Will probably upgrade soon.

This product was exactly what I needed