Flip-up Front Sight, Picatinny, Black

Made out of aluminum. Pretty light but also reasonably robust, esp for a part not intended to support any direct forces other than the shooters hand. Maybe not for war but at least as good as Magpul for the civilian. Does not spring load flip up, which is fine. Secure when folded down, held down by a spring loaded detent ball. Has a positive tactile click when deployed by hand and locks upright. Easy to use mechanism to unlock and fold down. No play so far… but only about 50 rounds of .300 BO while using. Made in US. Will update if there are problems but UTG had a decent customer service rep. Update: Tried these out in lieu of Magpul BUIS on a .300 build. At present they’re my only sight system but might be back-up in the future. They worked great during my first outing. I’m a recreational shooter so Magpul poly sights are fine, but I wanted metal sights in case they wind up being my only sights for some time. I have some higher end Troy flip ups on another carbine and though these are not as beefy they’re more than adequate and lighter. Rear sight windage adjustments have a positive click suggesting they won’t move without actually turning and adjustment is via a tool-less thumb knob. Front sights seemed on. At 40 + yards without a rest and shooting casually while standing, the bulk of my shots hit a six inch target, which is fine for practical accuracy. Also purchased because from a US manufacturer who I can at least find for product support and/defect returns if necessary, unlike many of the other budget options sold on this site. Follow up a few months later…hitting a 33% sized steel torso at 75 yards, again just standing and putting middle of target on top of front post.

Great Solid Site and MADE IN U.S.A. Nothing More to Say.

Strong and secure BUIS. These things are a bargain as irons from troy and magpul have exceeded 3 figures per sight, these sights are a bargain. They stay secure and don't move, consistently holding zero under abuse. Unlike most no name china sights out there, these are the real deal.

Seem solid. I don’t really use them because they are for back up and I haven’t needed them. I zeroed them, which was easy, then folded them down and put my optic on. I have no plans to intentionally beat up my rifle just to see how tough they are.

Made from lightweight aluminum, the rear BUIS is offset to clear charging handle unlike magpul, really nice for the cash. I can't wait to test these out I'll come back and update once used for a few months!

Good alternative to plastic MagPul

Decent construction with good material and worth the money I paid for it. Does not have open assist which is fine by me. You only push the button to lower the sight. Took off a star for poor design choices. There are some design issues that are going to be minimal for an average user. I however see avoidable problems that would have been better not included to begin with. The locking system is a pin that has been milled down to be too thin. The area it locks up on is just a single side on the left that lets the sight wiggle 1~2 mils side to side and back and forth. Good enough for backup as they were intended but not for main usage if you are building a gun or if the one you bought had a manufacture too cheap to give you sights. Improvements recommended for the design: Locking in the up position should be done on both sides. Enlarge the lock up surface to be bigger than a #2 pencil lead. (The cone shaped part of the pin is too thin.) The pivot pin should be screwed in similar to how the mounting screw is. Using a steel staked in pin is going to loosen and fail when the materiel it is staked into is very thin Aluminum at the place that is the most violently shaken when fired. The locking pin needs to be moved from the very front to the middle. Where it is at now the material supporting it is way too thin.

Good quality...

UTG pro is as good as any. I highly recommend.

Good quality