Question 1

Is it the set, or is it singular?

Accepted Answer

It is a set.

Question 2

Will this fit my 2006 jeep liberty sport

Accepted Answer

It worked on my 2007 Jeep.  Don't know about 2006

Question 3

Will these fit a 2007 Jeep commander?

Accepted Answer

No, these don't fit.
Please refer to https://www.amazon.com/dp/B01DD26TR4?ref=myi_title_dp
BOXI 2pcs Rear Glass Window Lift Supports Struts For Jeep Commander 2006-2010 Rear Glass Window 55369333AB
Manufacturer Part Number: BXC300028018-2
    Fits the following Jeep Commander Years:
    2006 | 65th Anniversary Edition Sport Utility
    2006-2010 | Base Sport Utility
    2006-2010 | Limited Sport Utility
    2006-2010 | Overland Sport Utility
    2006-2010 | Sport Sport Utility

Product information
    Extended Length [in] 16.06      (measured between the ball fitting centre)
    Compressed Length [in] 10.56
Please double check the Length, compare them to the units on your vehicle to make sure that they are the same before place the order.
We hope you find this information helpful. If you have any further questions, please feel free to contact us.
Have a great day!

Thank you & Best Regards,
BOXI Auto Parts Customer Service Team

Question 4

Do these lift supports come with installation instructions~?

Accepted Answer

Removal Of The Strut Rod
Remove the spring clip holding the strut at the Rear Window Glass end of the rod. A small, straight screw driver makes a great tool to pry the clip off. Do not discard this clip.
Pull the strut away from the ball mount on the Rear Window Glass. It should pull right off once the clip has been removed.
Remove the spring retaining clip on the lower end of the strut rod and set it aside. The strut should now be free and may fall off the mount.
Installation Of The New Strut Rod
Verify that the mounting points, length and diameter of the new strut matches the one that you removed. If the new strut comes with new ball mounts, now is the time to replace them.
Attach the new strut rod on the lower mount by sliding it straight onto the ball mount. Place a small drop of grease on the mount to ensure there is no binding of the strut on the mount.
Snap the retaining clip into place on the strut rod. Be sure it clips on securely and still allows the strut to swivel on the mount.
Slide the strut rod on to the upper mount, and apply a small amount of grease to ensure movement of the strut on the mount. Snap the retaining clip into place and be sure it is completely seated.
Repeat for the second strut rod and remove the broom handle or wooden support at this time. Close the Rear Window Glass carefully to check for proper movement and operation of the strut.

Qty(2) BOXI Rear Window Glass Lift Supports Struts Shocks Gas Struts Shocks Springs Supports Fit for Jeep Liberty 2002-2007 Sport Utility | Replaces SG314048 55360171AA 55360171AD 55360171AB 4365

Beschreibung

Haben Sie eine Frage? Sehen Sie, was andere fragten

Häufige Fragen