what the difference between this and the polycrylic??

I use both for different reasons. This oil base is more durable against wear and water rings than polycrylic for things like table tops and countertops. It is easier to get a smooth finish when brushing because it dries slower and flows out flatter. It WILL impart a warm, yellowish finish that is visible on lighter woods, and it will create a darker patina with age. It gives a warm, amber glow to medium or dark wood finishes. This quality may or may not be desirable. It usually only requires two coats. Use it for durability, a warm, aged patina, and ease of application towards a smooth finish. Polycrylic is not as durable and can show "elbow wear" on table tops after a few year. It will stay crystal clear on white woods, but can impart a milky sheen on darker woods. It dries fast, so you can sand between coats much quicker than oil. However, that can make it tricky to brush it on and get a smooth finish, especially if you brush back over it when it gets tacky. It requires minimum of 3 coats, 4 for long durability. on wearable surfaces Use it when you need a crystal clear finish on light colored woods, and fast drying between coats is desired.

Will it be very shine and smooth for the surface after I use? thanks

Yes. I recommend first using a 600 grit sandpaper to lightly remove old finish. Remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Wait 24 hours to dry. Next lightly sand using a 1500 grit sandpaper, remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Repeat this step two more times. Glass feel may require additional applications. Remember thin coats. PS: If you choose the brush method, do not use sponge brushes since it is more likely to leave bubbles, use a good quality sable hair brush. I did a bar top decades ago applying clear polyurethane with about 20 thin coats in the first year about once every other week and I left a penny at the end of the top and coated over it until it disappeared ant the bar top was so smooth. The top was red mahogany that is probably still a luster for the new owner. I could slide a bear from one end to the other end.

Can this be used on floors?

Yes, this oil based polyurethane fast drying is absolutely engineered for hardwood floor and definitely in high traffic areas. I used the water based polyurethane in the dining room and this is the hallways, this looks so good and is holding up better than expected.

what is the best way to apply this

Use a bristled brush. Those sponge brushes leave bubbles in it.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

Laden Sie die App herunter

Wir beziehen Elemente von

VAE
UK
Indien
USA
Japan

Kundendienst

Über uns

Kundenbetreuung

Unsere Anderen Marken:Hewyn|Selfship

Rezensionen

M**E

Reliable Polyurethane Finish for Long-Lasting Wood Protection

I’ve been using Minwax Fast Drying Polyurethane Protective Wood Finish, and it provides excellent protection for wood surfaces. The finish dries quickly and builds a durable, resilient layer that shields wood from scratches, moisture, and wear. For the best results, multiple coats with light sanding between each layer are recommended, as this helps create a smooth, even, long-lasting finish. Overall, this product is dependable, effective, and a must-have for woodworking or finishing projects where lasting protection is a priority.

6.01.2026

A**R

Great price for great product

Great price for great results. I just finished building a small table out of pallet wood and after 6 coach.I've got a great finish

31.10.2025

M**O

I've used this before. Good stuff

4.01.2026

L**.

Reliable.

Three coats and dries fast. Clear finish. Dependable. Easy to apply.

3.11.2025

R**E

Just like it is supposed to work. A very hard finish that can be matted to taste

I have tried many different finishes. I always come back to poly, and I always come back to Minwax. This works like it is supposed to work. I can easily create a matte finish with steel wool and mineral spirits. I have always had problems with this and other finishes drying out before I was done. I have completely solved that by shooting a bit of Bloxygen into the can before sealing it, then storing the can upside down. I dilute the finish by 40% to make a near wiping varnish.

16.02.2025

J**N

Better than others.

After years of using a high priced competitor (GF) and having recent issues with streaking and fish-eyes I decided to try Minwax. Cheaper, dries quicker, better leveling, bubbles quickly vanish, and no fish-eye. My go to polyurethane at this point.

12.09.2025

D**N

Polyurethane

Very good quality. Easy to use. And it protected what I needed sealed from water. Nice glossy finish.

1.09.2025

K**A

AZ Approved

Great for all types of wood. Used this on 2 different types of wood and it has lasted so far with the AZ weather.

6.01.2026

J**O

MUY BUENO, SECA RAPIDO

22.05.2025

ASIN	B000VZNESE
Batteries Included?	No
Batteries Required?	No
Best Sellers Rank	#11,523 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #14 in Household Polyurethanes, Shellac & Varnish
Color	Semi-Gloss
Coverage	125 ft²/quart
Customer Reviews	4.7 4.7 out of 5 stars (1,784)
Date First Available	July 19, 2004
Finish	Semi-Gloss
Global Trade Identification Number	00027426630055
Included Components	Minwax Fast-Drying Polyurethane, Warm Semi-Gloss, Clear, 1 Quart
Item Form	Liquid
Item Package Quantity	1
Item Weight	1.9 pounds
Item model number	63005444
Liquid Volume	11.36 Fluid Ounces
Manufacturer	Paint Sundries Solutions
Number Of Pieces	1
Part Number	63005444
Pattern	Polyurethane Protective
Product Dimensions	4.13 x 4.13 x 5.13 inches
Size	Quart
Style	Semi-Gloss
UPC	027426630055
Warranty Description	Warranty

Minwax Fast Drying Polyurethane Protective Wood Finish, Clear Semi-Gloss, 1 Quart

Details

Beschreibung

Spezifikationen

Rezensionen

Häufige Fragen