Simple Deluxe 18 Inch Pedestal Standing Fan, High Velocity, Heavy Duty Metal For Industrial, Commercial, Residential, Greenhouse Use, Black

The items motor got extremely hot to the touch and I did not trust it so I returned it, and I was given a full refund. Thank you.

Very powerful .. Sturdy and with it being a stand, safer for my long dogs ..Definitely would recommend this.Thank you.

The media could not be loaded. It's a very sturdy fan it puts out a ton of air. And the fact that it's all metal. I was reading the specs and it said the fan is plastic but it's clearly aluminum so that's even better. You don't have to clean metal as much as you do plastic. If you haven't got one of these, you really need to get one. I bought it used. Keeps it out of the dump.

Loud after a year construction wise hard to clean

I bought this fan to blow across the top of my wood stove to distribute heat. It has a simple 3 speed control switch on the back of the fan and almost everything is metal except for the cover on the base, height adjusting tensioner and the fan angle adjustment knobs( there are metal captive nuts so you could remove those if you are trying to use this somewhere they could melt). It blows enough air at low speed for my purposes and isn’t too loud. I plan to use it in my garage in the summer on high where it does make noise but flows a lot of air. Very pleased with this. The simple speed switch is ideal for my setup where a temperature controller turns the fan on and off.

I couldn't assemble it. The directions included only the obvious steps and no explanation of how.I had the manual. In asked how. The instructions do not explain this. They are poor, incorrect, and insufficient.The instructions say:1. First put the bottom cover(7) on the base(8);2. Install the telescopic tube on the base and lock it with a nut(9);That means, I am to fasten the tube to the base using the l- shaped screw, washer, and nut. So I have to insert the screw through the washer into a hole at the bottom of the base? THERE IS NO HOLE IN THE BASE.There are a knob on each side so you can Tilt the fan and lock it in place. A plastic surface contacts the wire frame. The frame suits at an angle to the knock at the top parts of the U- shaped structure holding the fan. On one side the contact plastic is at an angle so the whole surface contacts the wire frame, but on the other side the contact is straight so it contacts the wire at one point so it slips. Normally this would mean you can't tilt the fan, but in this case it is also bending the wire.The labels in the assembly components do not match the items they point to.9 is not "nuts" it's an l- shaped screw, a bolt to be exact6 is not nut.4 are not nuts they're screws.Instructions:Nuts do not need screwdrivers, they need wrenches. The instructions said assembly required a screwdriver, but there doesn't mention any screws.If the instructions are translated or interpreted into English that should be done by someone who's native language is English.The instructions are for a lay person and any one with a low level of education and no technical experience should be able to follow them.Google translate would have done a better job of translating to British or American English.Thank you,Mo

The media could not be loaded. I got the replacement and this is what I wanted lol fan works great sounds great and really cools you off. I guess the first fan I recently ordered just had too much power lol but I still recommend it it’s a great fan and my old fan is still blowing strong too going on abouy 4-5 years now!I bought this industrial fan because I literally own one exactly like it that I bought like 3-4 years ago. This same brand and has lasted me and has been so amazing so I searched for it again because my son needed one for his room and me thinking, okay this fan brand has been durable and great so I purchased one again and this time upon turning it on it sounded like a planes wind turbine about to take off and it shook around until it fell. We looked it over made sure everything was screwed on properly tried it again and still so damn loud and shaky nothing like our old one. I put in for a replacement but I’m upset because I had such high hopes for this fan and it’s also expensive but I looked passed that because of how good the quality of my old one is. I will update when I get my replacement.

I have house that's almost 100 years old and the electrical system can hardly support modern microwaves and toaster ovens so air conditioners aren't much of an option. The only AC in my house is a large 220 volt window unit on the 2nd floor. Have one of these fans to blow the cold air down the stairs to the 1st floor and the 2nd at the bottom of the stairs to blow the air into my livingroom.These fans are great for airflow and helping you feel cool during hot weather. Their LOW setting is more powerful than standard box fans from places like Walmart. Even on low you can feel the air blowing from over 10ft away.Assembly was easy and the fans are sturdy since they are mostly made of metal. The base is quite heavy making them stable (and as a bonus, my cats seem to like sleeping on the base). The fan can be directed 360 degrees vertically and horizontally so you can easily direct the airflow anywhere you want.But being powerful fans, they can be loud. Fine for a bedroom or hallway where it acts as white noise, but in a livingroom you might have to double the TV volume to hear it as clearly as when the fan is off.