RVGUARD 50 Amp 125/250 Volt RV/EV Power Outlet Box, Enclosed Lockable Weatherproof Outdoor Electrical NEMA 14-50R Receptacle Panel, ETL Listed

An outdoor box for less than the cost of a 50A socket. Extra depth for the finger pull on some cords. Includes a cheap lock to keep vandals from stealing your charger or extension cord. Enough to keep casual thieves out but easily broken or cut. Box itself is quite sturdy and well made.

It was a great price and it was easy to setup. I set it up so I could charge my Tesla. Saved me thousands of dollars

It’s great product, strongly recommend, very satisfied!!,

Very stout enclosure and will last. Does exactly what I need for a 50amp. generator input. Now the bad news.....1) If working with big wire (mine was 6/3) you are in for a job. Not a lot of room in rear of box for manipulation.2) The front cover does not stay in the up position. This creates a hassle while installing/connection if you are by yourself.3) The 2 retaining screws that hold the front plate in place are TOO SMALL !! (this is inside the box with little room to work your fingers)4) As others have said, the punch outs are not punch outs. Get read to drill, cut, Dremel or whatever. Metal is thick and tough too.5) If you are not mechanically/electrically inclined, not good at trouble shooting/alterations or have the tools, this is not the box for you. Also, if big wire is your plan you better be willing to spend some time making this work.With all that being said, this box is one tough SOB and should last forever !! You just pay the price upfront. I am satisfied and I recommend if you're up to the task !! Don't say you weren't warned......

It's exactly what I needed for my new EV charger. I mounted it on the side of my garage and it keeps the rain out. Not much more to say. It's exactly what I needed and works great. It also comes with a small padlock if you need to lock it.

Great box for the price. I initially had my doubts as two little screws hold the faceplate/receptacle to the box, but it holds fast.

Perfect nice quality and design

Hint: Is not enough room inside to "Bend" the incoming wires (as I would normally do, in order to install/remove the outlet by pulling it forward and out of the box. Instead could only get the outlet installed by running the wires STRAIGHT UP through bottom of box, then into socket... which meas that you'll need to be able to PULL the resulting excess wires back through the mating conduit, as you locate the Outlet Box into place.I installed this box and another brand at same time... The other one was Larger and hence MUCH MUCH MUCH easier to hookup than this one