Yeeshy Bike Tail Light With Turn Signals Ultra Bright Wireless | Desertcart GERMANY
Yeeshy Bike Tail Light with Turn Signals, Ultra Bright, Wireless Remote Control USB Rechargeable, Safety Warning Bike Brake Lights and Flashing Lights, Waterproof IPX4
5.0/5
Produkt-ID: 151053738
Sichere Transaktion
Häufig zusammen gekauft
Beschreibung
1、ULTRA-BRIGHT LED BIKE TAIL LIGHT - squibomb bike tail light with turn signal has 29 of 85LM LED lights, bright enough to be seen from 150ft away in foggy/rainy day or even in dark night. USB charging directly(for light+remote control), environment friendly.
2、USB Rechargeable - The bike turn signals use 2200mAh Li-on battery, allow the bike tail light to be fully charge in 3-4 hours and can work for about 7 hours under constant brightness. The remote control use 180mAh Li-on battery, which can keep working for more than 2 months after 1-2 hours fully charge. Both the signal light and remote control can be charged from any USB Port, convenient and save your money and hassle.
3、IPX4 WATERPROOF - IPX4 Waterproof level make this bike turning light can be used in small to moderate rain in the temperature of in -4-140°F -- your best partner for outdoor biking. Cycling Safety Mountain Bike.
4、WIRELESS REMOTE CONTROL - Remote control the bike tail light to send signals in different modes by the 5 easy to use buttons on the wireless controller. Remote control on handlebar, easy for cyclist to control during riding. Suitable for Mountain, MTB and Road Bicycles.
5、Easy to Install - Take out the turn signal and the fixed support in the packing box, along the grooves, slide the fixed support in grooves and snap the buckle. Put the loaded turn signal on the bicycle seat tube and tighten it with screws, suitable seat tube:0.98-1.26in dia. The remote control is fixed on the bike handle and tighten it up with a screwdriver, suitable handle bar:0.71-1.1in dia.
Remote Control Pairing: At the same time, press the power button of the remote control and turn signal, when the turn signal flickers three times in red, it means the pairing is successful. Turn Signal Installation: 1.Take out the turn signal and the fixed support in the packing box, along the grooves, slide the fixed support in grooves and snap the buckle. 2.put the loaded turn signal on the bicycle seat tube and tighten it with screws. If it is too loose, you'd better to add a rubber gasket. (the turn signal is suitable for the seat tube size: 25-32mm). Remote Control Installation: Take out the remote control and then install it on the bicycle handle, tighten it up with a screwdriver. The remote control is suitable for the handle size: 18-28mm. Product specifications: Dimensions (W x H x D): 111.6*30*33.8mm Weight: 125g Waterproof Grade: IPX4 Power Supply : DC 5V 1A Red Warning Light Luminance: 85 lumen Battery Capacity: 2200mAh(bike tail light)/180mAh(remote control). Endurance Time: Work for about 7 hours under constant brightness Charging Time: The charging time is about 2-3 hours. Product Included: Intelligent Turn Signal*1 Remote Control*1 Turn Signal Fixed Support*1 Rubber Gasket*2 Micro USB Charging Cable*1 Fixed Screw and Nut for Turn Signal*1 M4 20mm Screw and Nut for Remote Control*1 M5 25mm User Manual*1 Warranty: 1. Please charge the lights in time before the batteries run out,or it will damage the batteries. 2. Use the USB cable comes with the light to charge, don't use other cables to charge, otherwise it's easy to damage the device.
Häufige Fragen
TrustPilot
TrustScore 4.5 | 7.300+ Bewertungen
Rajesh P.
Der Kundenservice war hervorragend, als ich Fragen zum Produkt hatte.
vor 2 Tagen
Fatima A.
Der beste internationale Versand, den ich je probiert habe. Jeden Cent wert!
