Kehuashina Silk Pla Filament for 3D Printer and Pens, Multi Color, Rainbow Like, Metal Metallic Color, Gradient Filament 1kg Gradually Changing Multicolor Spool - 1.75mm Diameter Filament

I use a Creality Ender 5 Pro with a 4mm nozzle. This filament worked great with little effort. I used the settings in another review of 220 at the nozzle and 67 for the bed. The color transitions are smooth and the color intensity is good. Not washed out like some shiny PLA's. Great stuff.

The rainbow silk effect is really nice looking, however, the plastic itself results in brittle prints. Especially if you're printing thin/small items like vases, etc. I thought it could be the printer having an issue but I tried the same print with 3 other PLA colors from reputable brands and they did not suffer from the brittleness.I even cooked it overnight in my dehydrator and it didn't help. This is the same PLA being sold by numerous vendors. Be cautious. I bought a roll from another vendor the first time and it had the brittle problem. When this roll arrived it was the same product as from the other vendor with the same exact issues.

This isn't the spool color in any of the other pics

I had loads of problems with this filament, especially layer delamination and breakages inside the feeder. It had all the symptoms of filament that had absorbed moisture, even though it was freshly opened and the vacuum seal had been intact, and it was also quite tangled.I managed to get it printing alright-ish first by unwinding & detangling and rewinding by hand as much as I thought I'd need for each print job, then increasing the print temperature to 210 degrees and the feed to 105%. The results were ok but not great. Beautiful colour though, but I'll be trying a different brand next time.

Poor quality filament looks a nice finish but continously blocks the extruder don't have this issue with any other pla filamentTried on 4 prints 3 failed less then 10%One I kept having to pause and unclock the extruder eventually gave up around 50% print if u need togo the toilet ur print will have failed by the time you come back

This filament printed really well. I've seen comments from people in the reviews and online saying they had a lot of problems with this filament but for me it was extremely easy to use and the results speak for themselves!

Amazing filament not cheapest but first print looks amazing. I don't make any profiles and tweeks yet and came out from printer awesome. Definitely recommend

This is nice filament when you get a good run without clogs. I purchased two rolls. I thought that maybe I would have better luck with the second one because I really liked it when I had a successful print. I averaged about three clogs per roll and changed out my nozzles three times. Because the failed prints were on the larger side, I wasted the equivalent of half a roll and many hours of printing. I use capricorn tubing and .04 nozzles. I did not have any blockages using a different filament. I found the best temperature to be around 200 Degrees for the main print with a starting temperature of 210. I had the bed set at 60 degrees.I like the silk effect and the transition effect from one colour to the other. Overall, I like the filament but wish I did not have the blockage experience I had. Pictured is a coffee pod dispenser I printed with this filament.