24V 6S 40A 18650 Li-ion Lipolymer Battery BMS PCB Balance for ebike ebicycle

24V 6S 40A 18650 Li-ion Lipolymer Battery BMS PCB Balance for ebike ebicycle

Q: is there a specific order that wires need to be soldered to the board? Mains first then balanced leads for example?

Assuming the wires are not connected to anything on the other end (aka your battery holder is empty and you have no load or charger connected ) you should be fine with any order. I would recommend moving from one side of the board to the other so you don't concentrate too much heat in one place. Try not to unsolder the pads from the board by applying to much heat. Don't solder live wires!

Q: Where does the charging lead connect?

Not answering the question, but my BMS had the same issue! No voltage/current at P+/P- when everything else is wired up!

Q: can anyone tell me how to connect to the load? do I use p+ and p-?

Initially it was not clear to me where the charge and where the load connected. Other reviews clarified that the both the charger and the load connect to the P+ and P-. The BMS auto switches between input and output depending on the voltage on P+P-. I tested it on my Power wheels car and the full 20 plus volts were on the (P+P=) output terminals. With the charger connected for couple hours it raised the voltage from 3.6 to 3.8. One cell was at 4.0v . I will leave it on the charger overnight and see if it balances better. If you connect your load to B+B= , it will work but you will not have any load overcurrent or under voltage protection for your battery pack. You would be able to run your device till the battery is totally dead, which damages l-ion cells.

Q: Can I wire two of these in series to make a 12s?

Yes, you probably could, but just be aware of the fact that if the BMS is unhappy with the 18650's that you have attached, it will shut down, so you're adding more points of failure by wiring two in series. I actually struggled with this 6S BMS for a while, and nearly gave up on it, because it kept shutting down, until I realized that the resistance of some of my cells was too high. After re-grading all my cells and culling the highest resistance cells, the BMS was able to stay up.

3.9/5

Produkt-ID: 122370360

Sichere Transaktion

Details

Brand
daier
Battery Cell Composition
Lithium Ion
Recommended Uses For Product
Bicycle
Unit Count
1.0 Count
Voltage
24 Volts

⚡40A Discharge

🔋24V Power

🛡️Safety Features

Häufig zusammen gekauft

daier 24V 6S 40A 18650 Li-ion Lipolymer Battery BMS PCB Balance for ebike ebicycle

200mm(7.9in) Width PVC Heat Shrink Wrap Tube 18650 21700 26650 Lithium Battery DIY Battery Pack 3M(9.9ft) Length Blue

MatchWhiz Flat Width 5.9in(150mm) PVC Heat Shrink Wrap Tube for 18650 21700 Lithium Battery DIY Battery Packs Blue Length 9.9ft (3m)

Beschreibung

⚡ Power Your Adventure with Safety and Style!

COMPACT DESIGN - Sleek dimensions (88*34*2.8mm) fit seamlessly into your setup.
POWER UP YOUR RIDE - Experience the thrill of a 24V power boost for your e-bike.
BALANCE CIRCUIT INCLUDED - Ensure optimal battery health with built-in balance circuitry.
COMPREHENSIVE PROTECTION - Ride with confidence, thanks to multiple safety features.
HIGH DISCHARGE PERFORMANCE - Unleash a robust 40A discharge current for peak performance.

The 24V 6S 40A 18650 Li-ion Lipolymer Battery BMS PCB Balance is a high-performance power protection board designed for e-bikes. It features a 40A discharge current, multiple safety protections, and a compact design, making it an essential component for any electric bicycle enthusiast.

Haben Sie eine Frage? Sehen Sie, was andere fragten

is there a specific order that wires need to be soldered to the board? Mains first then balanced leads for example?

Where does the charging lead connect?

can anyone tell me how to connect to the load? do I use p+ and p-?

Can I wire two of these in series to make a 12s?

Häufige Fragen

TrustPilot

TrustScore 4.5 | 7.300+ Bewertungen

Fatima A.

Der beste internationale Versand, den ich je probiert habe. Jeden Cent wert!

vor 3 Tagen

Sarah H.

Der Kundenservice hat meine Erwartungen übertroffen. Perfekt für den Kauf von Produkten, die man anderswo nicht findet.

vor 1 Woche

Sehen Sie sich alle Überprüfungen von TrustPilot an

Kaufen Sie weltweit ein und sparen Sie mit Desertcart

Preis-Leistungs-Verhältnis

Wettbewerbsfähige Preise für eine große Produktpalette

Kaufen Sie weltweit ein

Wir bedienen über 300 Millionen Käufer in mehr als 200 Ländern

Verbesserter Schutz

Vertrauenswürdige Zahlungsoptionen, die bei Käufern weltweit beliebt sind

Kundensicherung

Vertrauenswürdige Zahlungsoptionen, die bei Käufern weltweit beliebt sind.

Desertcart-App

Shoppen Sie unterwegs, jederzeit und überall.

€ 38.38

Zölle & Steuern inkl.

GERMANYspeichern

Kostenlose Rücksendungen

30 Tagefür PRO-Mitgliedschaftsbenutzer

15 Tageohne Mitgliedschaft

Sichere Transaktion

TrustPilot

TrustScore 4.5 | 7.300+ Bewertungen

Markus S.

Mir hat die Produktvielfalt sehr gefallen. Werde auf jeden Fall wieder hier einkaufen.

vor 2 Monaten

Ayesha M.

Das Produkt entspricht genau der Beschreibung. Sehr zufrieden mit meinem Kauf.

vor 5 Tagen

Sehen Sie sich alle Überprüfungen von TrustPilot an

Über uns

Kundendienst

Kundensupport

Regionaler Zugang

Rechtliche Hinweise und Richtlinien

Sozial

Holen Sie sich die App

24V 6S 40A 18650 Li-ion Lipolymer Battery BMS PCB Balance for ebike ebicycle

Details

Beschreibung

Haben Sie eine Frage? Sehen Sie, was andere fragten

Häufige Fragen