Elite Screens 6" Black Projector Screen L-Brackets, Single Metal Welded Construction, Wall or Ceiling Mount - Includes Hooks and Hardware, Model: ZVMAXLB6-B

This was easy to install and held my 120 inch screen up on the wall. I needed something that pushed the screen forward because I wanted to mount a tv behind the screen. This works and gave me just enough clearance. If you have a thicker tv or lot of wires you might want to go with a longer mount. It’s also great so when I don’t need the screen down, I can pull it up so the kids don’t run into it. It’s cheap and does the job. Just make sure you screw these into studs if you can because although it says it can mount to drywall and anchors, I have my doubts.

This worked out perfect for me. Super sturdy but, I used my own drywall support. I hate the ones that they included. They were making the support wiggle out from the wall. I had some half inch drywall supports that you don’t need studs for. What I loved about this product is the clips. I was about an inch off on my measurements but, the included clips will allow for an inch or so miscalculation as seen in my photo. You can tell it’s pulling it to the right to align. There are also some fine adjustments you can make to the height of each side of the screws to make sure your screen is perfectly leveled.

These work well, solid, and come with all the hardware. My only reason for not giving 5 stars is that they included the eyelets and carabiners to hook to the D ring. But this puts the projector screen considerably lower than I would prefer. I would have preferred the eyelet bolts to have been hooks instead. In my case, I used a grinder to turn them INTO hooks, so I can keep the screen as close to the ceiling as possible but still allow the adjustment with the bolts to level it.

These brackets were exactly what I was looking for. They allowed me to install a 120 inch screen with ease and I was watching movies in under 30 minutes . They are sturdy, functional and very easy to install. As an added bonus, the brackets make it much more simple to take the screen down too. I primarily use the screen in my home theater room but during pleasant summer evenings I like to take the screen outside and watch movies in the back yard. It takes only seconds to unhook it inside the house and hang it up outside.

The L-Brackets are made cheaply. One of them was not straight; it was twisted at the elbow. The hardware that is included is really cheap too. I had to use my own screws as the ones provided stripped immediately. One of the karabiners broke at the joint and doesn't close all the way unless you force it. All in all, I was able to mount my screen and it does look nice and professional. I mounted a 92" screen, so it isn't that heavy and isn't wide enough to require a bracket in the center. I imagine with a much larger screen it way not work as well. I think the product stinks, but I got it to work and it looks nice. Therefore it's acceptable.

These things are exactly what you need if you are wanting to hang a projector screen. Used these to hang my 100" screen. I used the drywall anchors that came with the mounts and they are solid. At first I only put one screw in for each bracket. Even then, it seemed secure. I decided to take things to another level (recommended btw) and screw in the remaining screws (3 per bracket) and my goodness it was as if these brackets were an extension of the wall itself they were so solid and secure. Keep in mind, neither of my brackets are screwed into a stud. Just drywall. These hang my projector screen with ease. I thought about hanging a second projector screen just to really demonstrate their holding prowess. I like the slotted rail at the top too for the case of being able to individually adjust each hanging side of the screen to square it up perfectly to the projector.

I bought these brackets to install my elite screens brand screen in my new home theater. I was stoked to find the same brand brackets as my screen, for I knew they would work perfectly, and they absolutely do! Although they weren't necessary, I do think they made the installation easier, and also allow for the screen to be adjusted for leveling much easier. For the cost, I definitely think they are a must for installing your screen!

The brackets made hanging the screen easier as it comes with all the hardware to mount to drywall. I am glad I had these as the screens do not come with any mounting hardware and would be hard to mount unless you had studs in the perfect spots. These give you some flexibility on leveling your screen and give you 3 secure screws to the wall where the screen only has 1 hole if you were trying to mount it straight to the wall. I am glad I spent the money to get the mounts rather than trying to direct mount the screen. I am using the elite 125 inch electric screen and these work well.

I have a 133" Screen and this 6" clamps are more than sufficient to hold such a big screen. I have been using it for the last one year. Excellent. First you need to be precise in your measurements of the 1) distance to view 2) Length of the room/hall/living room 3) determine the screensize based on the max distance available between the two ends of the room and also other obstructions for the screen/clamp for optimum size of the screen 4) then determine the appropriate Clamp size to hold such a screen (study them in the literature given in various forums/Amazon), 5) Mark the clamps/roofmounted stands positions. 6) Fix the first clamp at one side to gain max leverage on the other side. Clamp is affixed/clamped on to the wall wherein the Screen hangs from the clamp. 6) Always take the help of one more person and do not do it alone as need for the other person to measure the exact horizontal alignment is a must else one can have tilted screen.

As you can see by the 2 pics I bought this to hang my 120 inch remote control screen onto my ceiling. And this is the best bracket and so solid sturdy and safe, and so easy to install.

Deliver early ,brilliant. Quality excellent nothing more to say except perfect many thank

Additional hardware not included in the shipment. Contacted the seller and they completely ignored me. Don’t buy!

reçu comme indiqué mais je ne l'ai pas sorti de la bête retourné car achat tv à la place