White with Repair Tools Compatible with iPhone 7 Plus 5.5 Inch LCD Display Digitizer Screen Replacement Full Complete Front Glass Frame Assembly

I repaired my phone myself. Watch a YouTube video while I did it. Pretty simple. It took a little while for the touch to react. But I powered it down by pressing the down volume button and power off button on the side, restarted the phone and It was good. Quality is questionable... but it's functioning. No problems so far.

I read good reviews and some bad ones for this screen, but the screen has been working great so far. The touch is good for the most part, except when the screen is wet. The screen quality is surprising for the price! I know someone who got a screen for $5 less and their screen is trash compared to this. This screen color is very similar to the original. The viewing angles seem ok, but not as good as original. The 3d touch is finicky, works 80% of the time. Touch id and auto brightness works well. For the camera you will need to reuse your own clear bracket from original. It came with adhesive but it was for an older iphone maybe iphone 5, but I used a full waterproof seal I got from ebay. The plastic frame was also surprisingly thin, just a tad thicker than original not even noticable. Happy my screen was from a good batch. I used my phone for an apple trade in and it passed all the tests! Mailed it in and got a $270 credit towards my new iphone XR.

This is the second time I replace the screen for my mum’s phone, and this works flawlessly. Easy to install. Watch the installation on YouTube

The media could not be loaded. I bought two screens and this one came and worked good but the other screen which was iPhone XR screen came and worked but touch screen was not working i dont know if it’s the same seller that sold me both since both came in same package but im very disappointed by that screen I applied for a refund for it but this iPhone 7+ seems good and would recommend for you to buy everything though th screw drivers where so tiny

I saw the videos prior to purchasing it. I was a bit concerned because it seemed a little difficult. Well, I said give it a shot because I was going to get next to nothing for this phone.I installed it and it fixed my black screen.1. Have lots of patience. I am pretty good at fixing things, however this is a different animal.2. Have a clean and well lit area to work. The screws are super duper small, as small as 1.5 mm or less. I had two casualties and I was very careful.3. When using the tweezers, do not press too hard. If you don't grasp the screw well, it may "fling" off the tweezer upon squeezing.4. The magnetism on the tools sometimes made it difficult to guide the screws in.5. Use a blow dryer, when opening up the seal. Make sure you use the blow dryer away from your work area. The blow dryer will easily blow off screws.6. When removing the screws from each bracket, MAKE NOTE OF WHICH SCREWS GO WHERE. There are two size screws in one bracket. I didn't realize it until I started putting it back together.7. When removing the ribbons, a blow dryer helps also.8. The second ribbon on the battery side, I didn't remove. It was not necessary. It was hard to remove anyways. The second ribbon on the battery side does not get replaced.9. I did not have a spudger. I used a small jeweler flat screw driver. Be gentle.10. I almost gave up about 10 times thinking this is impossible.11. Take a picture when first opening up the phone so you can see the lay out; I failed to do that.12. Set aside a good few hours if this is the first time. It took me about 5 to 6 hours. I had to relook at the video at the phone and then on the computer to see how the parts are aligned. I had to see it several times. Then I used the computer because the phone is too small.In conclusion, if you have the time and patience, it can be done. Steady hands is a must. Now, the KICKER.....the screen turned on, which I was surprised. I had to factory reset the phone. Everything was working great... then I tried to use the HOME SCREEN BUTTON. It didn't work. I reopened the phone and everything was secure and looked fine. I googled how to use the phone without the home button. There is an alternative "home" button by changing the settings. See pics. All in all, not bad.

So I replaced the screen and something else at the same time. The screen was so easy to replace, it worked perfectly. If I hadn't have replaced the other part of the phone, I might have been able to still use it. Bottom line- watch the video on how to replace the screen, and you'll have no issues. Great product, very happy that it worked.

I installed this display, but it didn’t work. I checked my work for the longest time, to no avail. Since I needed a functional display immediately, I ended up having to bring it to the local repair shop- where they told me what the problem was- and it was the only problem I suspected it could be, after checking my work for so long- that one of the connectors did not snap into place correctly (you can feel it snap into place, but this port did not).So, I had to pay a person to tell me that this product was defective, and that I had installed it properly- and then had to pay him nearly four times of the cost of this display to have him install one for me.I would like to think this is a just an anomaly, and that your product is usually good, but I have no way of knowing.All I know is that depending on your product turned out really bad for me in this instance, and even refunding me would not be very good compensation. I bought this display in January, because I knew I would eventually need it, so now I cannot return it.So, I’m pretty much screwed on this purchase, unless you will make it right.

Replaced my Iphone screen with this product, had no issues with this product, highly recommend